C3's with 18" wheels only thread
The following users liked this post:
mark6183 (08-18-2019)
#665
Race Director
#666
Instructor
#667
Burning Brakes
#668
Advanced
Guys, thanks for the compliments. It has been a labor of love for 4 years now... I'm beginning to see the daylight!
Here is the build thread:
https://www.corvetteforum.com/forums...storation.html
The following users liked this post:
3JsVette (11-28-2016)
The following 5 users liked this post by AboveTheLogic:
ariba (01-03-2018),
Metalhead140 (01-04-2017),
mysticpete (10-21-2017),
Redbeard77 (11-11-2018),
vetteman1981 (05-08-2017)
#671
The following 2 users liked this post by mobird:
bobbarry (02-26-2017),
mysticpete (10-21-2017)
#672
Instructor
adapters and spacers
how, where did you come up with the adapters? please share
#676
Melting Slicks
This was my 80 with Halibrand 18 x 9.5, 265/40/18 front, 285/40/18 rear tires. Have since sold the car.
This is my 75 Convertible with Vision 18 x 9.5, 265/40/18 front, 285/40/18 rear tires. Hope to have it up running this summer. It is sitting high in the photo because the engine and tranny are not in it.
This is my 75 Convertible with Vision 18 x 9.5, 265/40/18 front, 285/40/18 rear tires. Hope to have it up running this summer. It is sitting high in the photo because the engine and tranny are not in it.
Last edited by v2racing; 03-18-2017 at 03:44 PM.
#678
back spacing question
just put a new compete rear in my 79 with 2 inch offset trailing arms. I currently have AR wheels with 5" back spacing and would like to go to the 18x10 ARs with 5.75" back spacing. Will this be any issue with the offset trailing arms, or other components?