C3 General General C3 Corvette Discussion not covered in Tech
Sponsored by:
Sponsored by:

Is this what the backside of the alarm is suppose to look like?

Thread Tools
 
Search this Thread
 
Old 10-10-2012, 07:32 PM
  #1  
AirborneSilva
Melting Slicks
Thread Starter
 
AirborneSilva's Avatar
 
Member Since: Aug 2012
Location: Titusville Florida
Posts: 3,487
Received 81 Likes on 68 Posts

Default Is this what the backside of the alarm is suppose to look like?

Some bubba, I believe, replaced the stock alarm switch with something that looks like it belongs on an soda machine and I "think" they put this on the backside (inner fender), am I right in my assumption? you can see it in the picture below, round object. As usual, thank you for your help

Old 10-10-2012, 11:39 PM
  #2  
oldsarge
Race Director
 
oldsarge's Avatar
 
Member Since: Aug 2007
Location: Canboro Ontario
Posts: 10,980
Received 14 Likes on 9 Posts

Default

Bubba was definetly back there, what year is that ???
Old 10-11-2012, 04:30 AM
  #3  
AirborneSilva
Melting Slicks
Thread Starter
 
AirborneSilva's Avatar
 
Member Since: Aug 2012
Location: Titusville Florida
Posts: 3,487
Received 81 Likes on 68 Posts

Default

Thanks for the reply Sarge, it's a 76.
Old 10-11-2012, 09:40 AM
  #4  
Easy Mike
Team Owner
Support Corvetteforum!
 
Easy Mike's Avatar
 
Member Since: Jun 2000
Location: Southbound
Posts: 38,928
Likes: 0
Received 1,468 Likes on 1,247 Posts
Cruise-In II Veteran

Default

I believe they used the stock location, but what they left you is not stock. If the alarm is working, possibly no real harm done.


Last edited by Easy Mike; 10-11-2012 at 09:43 AM.
Old 10-11-2012, 10:03 AM
  #5  
AirborneSilva
Melting Slicks
Thread Starter
 
AirborneSilva's Avatar
 
Member Since: Aug 2012
Location: Titusville Florida
Posts: 3,487
Received 81 Likes on 68 Posts

Default

Thank you Mike! I think I'll start another thread asking for pics of what it's suppose to look like. I'd post a pic of what bubba put in as a key but I'm embarrassed to show anyone
Old 10-11-2012, 11:43 AM
  #6  
Easy Mike
Team Owner
Support Corvetteforum!
 
Easy Mike's Avatar
 
Member Since: Jun 2000
Location: Southbound
Posts: 38,928
Likes: 0
Received 1,468 Likes on 1,247 Posts
Cruise-In II Veteran

Default

Originally Posted by AirborneSilva
...I think I'll start another thread asking for pics of what it's suppose to look like...
The AIM shows it. It is not much more than the key cylinder, a retainer, and a little bond-on shelf to protect the cylinder from splashes.
Old 10-11-2012, 12:11 PM
  #7  
AirborneSilva
Melting Slicks
Thread Starter
 
AirborneSilva's Avatar
 
Member Since: Aug 2012
Location: Titusville Florida
Posts: 3,487
Received 81 Likes on 68 Posts

Default

Originally Posted by Easy Mike
The AIM shows it. It is not much more than the key cylinder, a retainer, and a little bond-on shelf to protect the cylinder from splashes.
Yeah I was afraid you were going to say that I need to get used to finding stuff in the AIM.

I'll take a picture of the lame azz lock that bubba put on there as long as you guys don't laugh too hard, it really is a soda machine key but also bubba put a reflector on it very strange and retarded
Old 10-11-2012, 07:31 PM
  #8  
AirborneSilva
Melting Slicks
Thread Starter
 
AirborneSilva's Avatar
 
Member Since: Aug 2012
Location: Titusville Florida
Posts: 3,487
Received 81 Likes on 68 Posts

Default

Ok, so here's what bubba put on as a "key" for the alarm, don't laugh too hard - well ok go ahead but understand I did not do this and will correct it as soon as I can.... Hope to have the new engine in Saturday



Old 10-11-2012, 07:53 PM
  #9  
billcarson
Drifting
 
billcarson's Avatar
 
Member Since: Aug 2010
Location: nassau co. new york
Posts: 1,839
Received 45 Likes on 32 Posts

Default

reflector so you can find it at night.cool.
Old 10-12-2012, 05:13 AM
  #10  
AirborneSilva
Melting Slicks
Thread Starter
 
AirborneSilva's Avatar
 
Member Since: Aug 2012
Location: Titusville Florida
Posts: 3,487
Received 81 Likes on 68 Posts

Default

Originally Posted by billcarson
reflector so you can find it at night.cool.
Yeah that is too funny
Old 10-12-2012, 05:51 AM
  #11  
IndispensableSoul
Instructor
 
IndispensableSoul's Avatar
 
Member Since: Sep 2012
Location: Concord North Carolina
Posts: 172
Received 1 Like on 1 Post
Default

Originally Posted by AirborneSilva
Ok, so here's what bubba put on as a "key" for the alarm, don't laugh too hard - well ok go ahead but understand I did not do this and will correct it as soon as I can.... Hope to have the new engine in Saturday



That is so funny.... At least it matches the paint, sorta!
Old 10-12-2012, 07:15 AM
  #12  
AirborneSilva
Melting Slicks
Thread Starter
 
AirborneSilva's Avatar
 
Member Since: Aug 2012
Location: Titusville Florida
Posts: 3,487
Received 81 Likes on 68 Posts

Default

Originally Posted by IndispensableSoul
That is so funny.... At least it matches the paint, sorta!
Good point, kinda blends in

Get notified of new replies

To Is this what the backside of the alarm is suppose to look like?




Quick Reply: Is this what the backside of the alarm is suppose to look like?



All times are GMT -4. The time now is 12:03 PM.