My C3 Seats
#2
Burning Brakes
I don't believe there is any adjustment for the seat backs. I know someone that put a covered foam wedge behind the seat and was thick enough to move the back forward.
#5
Team Owner
Member Since: Jun 2000
Location: Southbound
Posts: 38,928
Likes: 0
Received 1,468 Likes
on
1,247 Posts
Cruise-In II Veteran
Don: standard 78 seats are the old style high backs. 79 and up use the split backs.
Last edited by Easy Mike; 12-05-2012 at 12:21 PM.
#6
I cut and placed heater hose (can double-up for more adjustment) on the clam-shell edge of the lower seat of my '80 to lessen the lean. Not a perfect solution, but cheap, easy, and improved the angle for me.
#9
Team Owner
You can also install some 1/2" spacers between the floor and the rear of the seat rails to change the seat tilt somewhat. Just purchase some Grade 5 mounting bolts that are 1/2" longer than the ones you remove. The change in the seat angle at the front of the seat will not cause any problems with the install or operation of the seat.