Distributer Help Please
02-05-2014, 12:00 PM
#1
Heel & Toe
Thread Starter
Member Since: Dec 2013
Location: bellman fl
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Distributer Help Please
I have gotten everything set up on the distributor except the two wires going from the wiring harness to the distributor. The wires are a tan and a orange and will plug up ether way so I'm not sure which wire goes to which side.
Thanks
Thanks
02-05-2014, 12:38 PM
#2
Team Owner
Member Since: Feb 2003
Location: Sitting in his Nowhere land Hanover Pa
Posts: 49,002
Received 6,943 Likes
on
4,782 Posts
2015 C2 of Year Finalist
Might help if you give year you are working on
02-05-2014, 04:52 PM
#5
Burning Brakes
Unless it's changed, your tach should be mechanical.
On my 73, the two wires from the harness go on the + coil post.
The wire from the coil - post should go on the distributor.
Mine is a black wire from starter and cloth braided one from
ignition switch.
Donnie
On my 73, the two wires from the harness go on the + coil post.
The wire from the coil - post should go on the distributor.
Mine is a black wire from starter and cloth braided one from
ignition switch.
Donnie
Last edited by DonnieP73; 02-05-2014 at 04:55 PM.
02-05-2014, 05:26 PM
#6
Based on pictures from an earlier post the OP switched to HEI
02-05-2014, 07:58 PM
#7
Melting Slicks
