What are you doing to your Shop/Garage
#101
Racer
One bay done. Two more to go.
Applied 4 coats of Mop & Glo and I am very pleased with the results. I am aware that the stuff is intended for indoor flooring, but it builds up nicely and gives a nice sheen to an otherwise dull stain finish.
Drove the Vette in today and any tire smudges clean up easily. Will see how it holds up with the car parked in place for a few days.
Applied 4 coats of Mop & Glo and I am very pleased with the results. I am aware that the stuff is intended for indoor flooring, but it builds up nicely and gives a nice sheen to an otherwise dull stain finish.
Drove the Vette in today and any tire smudges clean up easily. Will see how it holds up with the car parked in place for a few days.
#102
#104
Safety Car
Member Since: May 2004
Location: los altos hills california
Posts: 3,609
Received 1,126 Likes
on
730 Posts
https://www.corvetteforum.com/forums...post1590818765
_____________
p.s. what else might you notice in the photo?
Last edited by ignatz; 11-07-2015 at 12:41 PM.
#105
Burning Brakes
Thread Starter
I finally got the AC guy here to connect the lines and test the system.. Its working and blowing cold air ...
I'm ready for next summer....
I'm ready for next summer....
#106
Racer
#107
Burning Brakes
Thread Starter
I have been working on the heat/AC for the last few years.. The heat is difficult to work in here in Texas, I just want to keep it below 90 deg when I'm working....
The following users liked this post:
KYC4 (11-24-2015)
#110
Burning Brakes
While my '88 is at Cincy Speed I am rearranging my decor' a bit. I need to locate a junk set of C3 tail lights, license plate light and a later 'Corvette' script to put on the bumper cover. I am planning on using a Christmas light string to light up the tail lights and plate light.
The CFI stuff came off of my '84 Z51. The spare rim/air hose reel was also from the '84.
More to come as I continue. Really nice work from some of you here with this!
Later,
Lee
Wall art
Since this was done I've moved the air compressor to the left wall for more room.
The CFI stuff came off of my '84 Z51. The spare rim/air hose reel was also from the '84.
More to come as I continue. Really nice work from some of you here with this!
Later,
Lee
Wall art
Since this was done I've moved the air compressor to the left wall for more room.
#111
Racer
Two of three bays done. Stain and Mop & Glo seem to be working just fine.
Vette's been at the shop for a few days getting a new intake installed as well as the carb rebuilt.
Vette's been at the shop for a few days getting a new intake installed as well as the carb rebuilt.
The following users liked this post:
KYC4 (11-24-2015)
#113
Advanced
In the process of building a new garage; 54'x80'. Floor gets poured Tuesday. 2 weeks to cure enough for the other trades to bring in their equipment. I can't wait.
#114
Burning Brakes
Thread Starter
#116
Racer
I'm getting The Hot Rod Grille garage ready for my annual Hotrodder's Christmas party. Got the 9 foot tree decorated with all things "garage", including ornaments depicting cars, petro, soda, coin-op, etc. and my 1950-60's toys from my childhood under it. The tree topper is a lighted 1950's gumball machine! The "Major Award" leg lamp will be in the garage until Christmas Eve when it gets moved to the window in the living room to allow my neighbors to enjoy "the soft glow of electric sex". It's never too late to have a happy childhood!
Jim
Jim
#118
Drifting
I moved the dirt oval race posters from the shed to the garage....Does that count....? Next up will be finishing the counter top across the back.
Brian
Brian