I DID IT! I ordered the blueprint 396!
#1
I DID IT! I ordered the blueprint 396!
http://blueprintengines.com/index.ph...-base-bp3961ct
I have shopped and researched for the past two weeks and finally settled on blueprint, due primarily to their activity on this forum, and recommendations from previous purchasers. I also called them and was given very good customer service when asking questions. The only negative thing I encountered was sending them an email through their "contact us"... to which I received no reply. I'm hoping that was just a fluke or technical issue!
I'm on pins and needles waiting for this (by far) best-christmas-present-of-my-life. I will let everyone know how it goes!!
I have shopped and researched for the past two weeks and finally settled on blueprint, due primarily to their activity on this forum, and recommendations from previous purchasers. I also called them and was given very good customer service when asking questions. The only negative thing I encountered was sending them an email through their "contact us"... to which I received no reply. I'm hoping that was just a fluke or technical issue!
I'm on pins and needles waiting for this (by far) best-christmas-present-of-my-life. I will let everyone know how it goes!!
Last edited by BDoc; 12-21-2014 at 10:19 AM. Reason: typo
#2
Also, FYI, if you order through JEGS rather than through blueprint, the shipping is $100 cheaper. I called blueprint and gave them the opportunity to match it, assuming they'd make more if I purchased direct, but they were not able to. Just a tip for anyone else that decides to use them!
#4
Intermediate
Member Since: Feb 2014
Location: Treasure Coast Florida
Posts: 28
Received 0 Likes
on
0 Posts
Love the 396 ability to twist like a SB, And give the BB push you into the seat power!
Still my favorite BB of them all. You made a wise choice, enjoy it
Still my favorite BB of them all. You made a wise choice, enjoy it
#6
Race Director
Also, FYI, if you order through JEGS rather than through blueprint, the shipping is $100 cheaper. I called blueprint and gave them the opportunity to match it, assuming they'd make more if I purchased direct, but they were not able to. Just a tip for anyone else that decides to use them!
My shipping direct from BluePrint was FREE
#10
Race Director
BDoc, didn't mean to bum ya out about the free shipping I got.......maybe it was just a special I got at the time and didn't even know?!
Your engine is bad ***! Kinda makes me wish I sprang for the extra CID's !
My little 383 rocks.....that thing is gonna fly
Start a swap thread!!!
Your engine is bad ***! Kinda makes me wish I sprang for the extra CID's !
My little 383 rocks.....that thing is gonna fly
Start a swap thread!!!
#11
Nam Labrat
Member Since: Sep 2013
Location: New Orleans Loo-z-anna
Posts: 33,898
Received 4,176 Likes
on
2,737 Posts
Congrats on the 396...you've gotten a power-house there!
My friend had a new Chevelle SS 396 off the showroom floor....When the automatic shifted into 2nd gear it would burn rubber for 100 feet......then "bark the tires" when it went into 3rd gear....
So.....you should have LOTS of fun.
My friend had a new Chevelle SS 396 off the showroom floor....When the automatic shifted into 2nd gear it would burn rubber for 100 feet......then "bark the tires" when it went into 3rd gear....
So.....you should have LOTS of fun.
#13
Thanks all. My shipping got delayed because Jegs needed to call me back (at 4pm the next day) at my billing number for verification but I should still have it by the new year!
#14
Shopping list
So here is my shopping list. I could use some proof-checking on the carb, distributor, and flywheel choices if anyone can help chime in. I want to avoid making mistakes on any of this
Distributor
http://www.summitracing.com/parts/msd-8365/overview/
Intake (already own)
http://www.summitracing.com/parts/edl-7101
Carb
http://www.summitracing.com/parts/hl...70rd/overview/
Headers
http://www.summitracing.com/parts/ho...1hkr/overview/
Flywheel
http://www.summitracing.com/parts/hay-10-630/overview/
Clutch
http://www.summitracing.com/parts/ct...model/corvette
Drive shaft U-Joints
http://www.summitracing.com/parts/mo...model/corvette
Intake Gasket
http://www.summitracing.com/parts/edl-7201/overview/
Harmonic Balancer
http://www.summitracing.com/parts/su...make/chevrolet
Radiator
(Automatic trans cooling for futureproofing, and electric fans)
http://www.dewitts.com/collections/c...num-radiator-1
Steeroids
http://cmc.speeddirect.com/customkit...3031-1-250&eq=
Distributor
http://www.summitracing.com/parts/msd-8365/overview/
Intake (already own)
http://www.summitracing.com/parts/edl-7101
Carb
http://www.summitracing.com/parts/hl...70rd/overview/
Headers
http://www.summitracing.com/parts/ho...1hkr/overview/
Flywheel
http://www.summitracing.com/parts/hay-10-630/overview/
Clutch
http://www.summitracing.com/parts/ct...model/corvette
Drive shaft U-Joints
http://www.summitracing.com/parts/mo...model/corvette
Intake Gasket
http://www.summitracing.com/parts/edl-7201/overview/
Harmonic Balancer
http://www.summitracing.com/parts/su...make/chevrolet
Radiator
(Automatic trans cooling for futureproofing, and electric fans)
http://www.dewitts.com/collections/c...num-radiator-1
Steeroids
http://cmc.speeddirect.com/customkit...3031-1-250&eq=
#15
Race Director
That's a heck of a good list
Couldn't view the Summit stuff on my tablet - "too many redirects"
You are going to add to that list a LOT as you go
This is gonna be a very worthwhile engine swap!
Couldn't view the Summit stuff on my tablet - "too many redirects"
You are going to add to that list a LOT as you go
This is gonna be a very worthwhile engine swap!
#16
Safety Car
toss those u-joints .. get solid with no grease fittings ..
#19
Race Director
#20
Safety Car