Need help with converting auto to 4spd
10-05-2015, 01:38 PM
#1
Melting Slicks
Thread Starter
Member Since: Oct 2006
Location: hebron IL
Posts: 2,920
Received 167 Likes
on
141 Posts
C3 of Year Finalist (appearance mods) 2019
Need help with converting auto to 4spd
I just started on my work to convert my '75 from auto to a B&W super T-10 manual 4spd. So I have a question for anyone who has done this. The crossmember does not line up with the trans mount on the 4spd. Has anyone run into this situaion. Thanks
The following users liked this post:
The Punisher (10-05-2015)
10-05-2015, 02:04 PM
#4
Drifting
I don't have a name or a pic but I'm sure Alan71 will jump on here and post some great pics of what you're needing. The bracket was used on all 4 speed cars and 76-79 automatics with the 350 trans. Your car was a 400 trans so it didn't use the bracket.
Mike
Mike
The following users liked this post:
The Punisher (10-05-2015)
10-05-2015, 02:27 PM
#6
Race Director
I think I have an extra bracket, in fact I probably have enough parts to make an auto to 4spd conversion, if you or anyone else is interested send a PM
Last edited by redvetracr; 10-05-2015 at 02:29 PM.
The following users liked this post:
The Punisher (10-05-2015)
