70 drivers side wheel well holes
#1
Melting Slicks
Thread Starter
70 drivers side wheel well holes
I posted on the NCRS site regarding some holes that maybe should not be in the driver's side wheel well.
I am having problems with my internet provider at home that will not allow access to the NCRS website.
See pic below.
I am at the point of cleaning the wheel well and now would be the time to fix the holes.
Thoughts?
Bill
I am having problems with my internet provider at home that will not allow access to the NCRS website.
See pic below.
I am at the point of cleaning the wheel well and now would be the time to fix the holes.
Thoughts?
Bill
#2
Team Owner
Member Since: Jun 2000
Location: Southbound
Posts: 38,928
Likes: 0
Received 1,468 Likes
on
1,247 Posts
Cruise-In II Veteran
#3
Team Owner
Member Since: Sep 2006
Location: Westminster Maryland
Posts: 30,173
Likes: 0
Received 2,878 Likes
on
2,515 Posts
Hi Bill,
My 71 has a single hole in that area, high up near the hood surround for an additional clip on the compartment side for the hose and harness bundle.
Here's a picture of a 69 with 3 undrilled dimples but at different locations than yours, ???.
Regards,
Alan
My 71 has a single hole in that area, high up near the hood surround for an additional clip on the compartment side for the hose and harness bundle.
Here's a picture of a 69 with 3 undrilled dimples but at different locations than yours, ???.
Regards,
Alan
#4
Melting Slicks
Thread Starter
#5
Melting Slicks
Thread Starter
Hole
From what I can tell the one hole appears to be factory. There is no evidence that the factory drilled the other tow but no evidence they didn't.
Looks like I am fixing two holes.
Kind Regards,
Bill