C3's with C4/C5/C6 wheels pics
#2
Drifting
Punisher
Here is my red 68' at our company show. Running 1993-95 C4 style ZR1 rims from SLP
The bad- they discontinued them
Here is my red 68' at our company show. Running 1993-95 C4 style ZR1 rims from SLP
The bad- they discontinued them
The following users liked this post:
The Punisher (07-22-2016)
The following users liked this post:
The Punisher (07-22-2016)
#4
Team Owner
My '72 with '89 vette rims......keep in mind that I kept the same wheel centerline as stock, by using VBP 2.5" thick wheel adapters and that the previous owners put some later shark size flares on the car, pix in my sites below....
The following users liked this post:
The Punisher (07-23-2016)
#6
#7
Safety Car
my SawBlades on my C3
mockup and fitment test
final wheels will be fully polished
custom made Billet center caps
mockup and fitment test
final wheels will be fully polished
custom made Billet center caps
The following users liked this post:
The Punisher (07-24-2016)
#8
Melting Slicks
If you like those wheels guard the center caps like gold! SLP disco'd the wheels when the company was sold and they are impossible to find. Tire shop dropped a tire on one of mine and I have been looking for months to find a replacement.
#9
Drifting
That sucks. I ALWAYS remove them when I bring it in for service. I'm sure we can find someone or something on EBay, or in Palatine there has to be a machine shop that can make them. I will keep an eye out for one if I come across them
#10
Drifting
Try these guys. Won't be the same but at least there is no hole in the middle
The following users liked this post:
The Punisher (07-24-2016)
#12
Drifting
#13
Melting Slicks
#14
Drifting
Thank you sir. MUCH appreciated After years of work and still a lot ahead, sometimes gets discouraging or never seems like the car will ever get done (That picture was taken Fall of '14)
Last edited by Ibanez540r; 07-24-2016 at 10:37 PM.
#15
Race Director
It's a long thread to go thru, and maybe you've seen it already, but there are lots of wheel ideas in the thread below including wheels from C5 and C6's:
https://www.corvetteforum.com/forums...ly-thread.html
https://www.corvetteforum.com/forums...ly-thread.html
Last edited by VETFEVER; 07-25-2016 at 09:19 AM.
The following users liked this post:
The Punisher (07-25-2016)