Edelbrock Performer Intake and 600 Carb Installation
#1
Safety Car
Thread Starter
Parts list: Intake manifold gasket, water neck gasket, valve cover gaskets (just in case), distributor base gasket, carb base gasket, high-temp RTV silicone gasket maker, vacuum port plugs, generic throttle return spring, carb mounting studs, tape to mark distributor or to number plug wires, gallon of coolant, scraper (to remove old gaskets), large wrag (for gasket parts that fall onto top of block). That is all I can think of for now.
Tips: Mark the distributor or number you plug wires, and do not turn the distributor once it is removed. Remove the lower radiator hose to drain the coolant before you begin.
The standard-height Performer manifold (not the "Performer RPM") should fit with the stock air cleaner.
Good luck!
Tips: Mark the distributor or number you plug wires, and do not turn the distributor once it is removed. Remove the lower radiator hose to drain the coolant before you begin.
The standard-height Performer manifold (not the "Performer RPM") should fit with the stock air cleaner.
Good luck!