Wtb Rear 3/4" Sway Bar
#4
Burning Brakes
Well, not laying around in so many words. I have one on my 71 but I have not been using it (either the car for a/x or the bar since it's not connected anyway). I'd sell it for $85
The one laying around is a 7/8
The one laying around is a 7/8
#5
Burning Brakes
Thread Starter
Originally Posted by greendot
Well, not laying around in so many words. I have one on my 71 but I have not been using it (either the car for a/x or the bar since it's not connected anyway). I'd sell it for $85
The one laying around is a 7/8
The one laying around is a 7/8
I'd like to look into what a 7/8" would do for my car. A couple of the bigger places reccomend a 3/4" rear sway with the 1-1/8" front as I have. Hopefully some menbers will chime in here, as I'd like some input. Small block w/ a 7 leaf Vansteel spring in the rear along with Smartstruts & VB&P 550's up front & I know the diameter of the sways figure into the equation with some importance. I carry the spare tire & the tub also.
#7
Burning Brakes
Thread Starter
Originally Posted by greendot
Just to be clear, I was offering to take the 3/4 off my car to sell it if you want it.
my error, I didnt get you the first time. The wife tells me all the time, that I dont pay attention, but I thought it was just selective hearing, Sorry, yes I'd be interested in the 3/4", are all the parts there or just the bar, as I need all the parts?
#8
Burning Brakes
I have the bar, the frame brackets and bushings, the trailing arm brackets. Missing the link between the trailing arm brackets and the bar. This is the style like the front bar, not the typical C3 rear bar link, so those parts would be easy to find at any auto parts by measuring just what length you want and checking their stock.
Sometimes my messages are clear to me but not to other people
Sometimes my messages are clear to me but not to other people
#10
Drifting
Complete 3/4 inch
I have a complete 3/4 inch rear sway bar I took off my '80 - brakets, bolts, bar, etc.. It's only a couple of years old and in excellent shape. I'll take pictures and send them by e-mail if you're interested.
These were left over after a COMPLETE front and rear rebuild VBP kits.
Let me know.
These were left over after a COMPLETE front and rear rebuild VBP kits.
Let me know.
#11
Burning Brakes
Thread Starter
Originally Posted by MN80Vette
I have a complete 3/4 inch rear sway bar I took off my '80 - brakets, bolts, bar, etc.. It's only a couple of years old and in excellent shape. I'll take pictures and send them by e-mail if you're interested.
These were left over after a COMPLETE front and rear rebuild VBP kits.
Let me know.
These were left over after a COMPLETE front and rear rebuild VBP kits.
Let me know.
#13
Le Mans Master
Truly stock style bars are fairly thin. I think 9/16" is largest ... might be wrong.
Could be 7/16".
Pretty sure: For 3/4, you need to go aftermarket with links like front.
You can always retro-fit some small rod-end bearings in place of links.
I did not. Aftermarket setup installed - 1.125"/.75"
http://nhvette.homeunix.com/ftp/in/wheels_04.jpg
Could be 7/16".
Pretty sure: For 3/4, you need to go aftermarket with links like front.
You can always retro-fit some small rod-end bearings in place of links.
I did not. Aftermarket setup installed - 1.125"/.75"
http://nhvette.homeunix.com/ftp/in/wheels_04.jpg
#16
Burning Brakes
Thread Starter
Originally Posted by Bee Jay
I don't mind aftermarket. That's what I have now. I have to modify to fit with my 18" wheels. I think I only have 5/8" now. I would like thicker.
I dont mind aftermarket for many things, I just thought I'd have less dinking around installing to OEM, but as I've learned, the OEM was not that thick in diameter and I do want the 3/4".
#17
Burning Brakes
Thread Starter
Originally Posted by paulywannafly
I must have at least 30 rear bars and none are even close to 3/4
still have to check my storarge lot but things are looking grim
still have to check my storarge lot but things are looking grim
Jimbo
#19
Burning Brakes
Originally Posted by Bee Jay
I don't mind aftermarket. That's what I have now. I have to modify to fit with my 18" wheels. I think I only have 5/8" now. I would like thicker.