1969 L88 427 4 bolt Block & 7115 crank + lots of BBC parts
#1
1969 L88 427 4 bolt Block & 7115 crank + lots of BBC parts
Here are the details:
Casting # 3963512
4 bolt main
casting date E149 (may 14, 1969)
Block has been decked so there is no suffix
Fresh .060 over bores
cleaned and magged
ready for reassembly
This block would work for an L88 vette, camaro / chevelle copo 427, or chevelle 454 ls6 (obviously with a different crank). Also comes with original gm 7115 forged steel crank (cross drilled, nitrided). This is the same crankshaft used in the ZL1 motor. Crankshaft is standard on the mains and .010 under on the rods. Could use some polishing but other then that it is perfect. $5000 Email me at SHabr66@aol.com if you are interested. Thank you.
I also have the following parts for BBC:
GM / Chevy ls7 rectangular port cylinder heads, open chamber, 118cc. ( 990's ) $800
Eagle Forged H beam rods, new in box (p/n crs6135) $300
TRW Forged Pistons, will work on .060 over 427 / 454, 11.5:1 comp w/ 116cc chambers, new in box (p/n L2308AF-60) $400
Crane Solid Roller Cam & crane roller lifters, installed in motor but never ran, like new (camshaft p/n 139576) $450
Edelbrock Victor 454-R manifold, single plane, dominator flange, rectangular ports, like new, never been bolted up $175
Milodon 8 qt. oil pan w/ pump pickup. Like new, never bolted up $250
Milodon Head Stud Kit, new in box. $100
1965 chevelle Z16 396 / 375hp holley 750cfm carb list 3310, needs rebuild (gm p/n 3878261-EH) $200
Casting # 3963512
4 bolt main
casting date E149 (may 14, 1969)
Block has been decked so there is no suffix
Fresh .060 over bores
cleaned and magged
ready for reassembly
This block would work for an L88 vette, camaro / chevelle copo 427, or chevelle 454 ls6 (obviously with a different crank). Also comes with original gm 7115 forged steel crank (cross drilled, nitrided). This is the same crankshaft used in the ZL1 motor. Crankshaft is standard on the mains and .010 under on the rods. Could use some polishing but other then that it is perfect. $5000 Email me at SHabr66@aol.com if you are interested. Thank you.
I also have the following parts for BBC:
GM / Chevy ls7 rectangular port cylinder heads, open chamber, 118cc. ( 990's ) $800
Eagle Forged H beam rods, new in box (p/n crs6135) $300
TRW Forged Pistons, will work on .060 over 427 / 454, 11.5:1 comp w/ 116cc chambers, new in box (p/n L2308AF-60) $400
Crane Solid Roller Cam & crane roller lifters, installed in motor but never ran, like new (camshaft p/n 139576) $450
Edelbrock Victor 454-R manifold, single plane, dominator flange, rectangular ports, like new, never been bolted up $175
Milodon 8 qt. oil pan w/ pump pickup. Like new, never bolted up $250
Milodon Head Stud Kit, new in box. $100
1965 chevelle Z16 396 / 375hp holley 750cfm carb list 3310, needs rebuild (gm p/n 3878261-EH) $200
Last edited by SHabr66; 06-22-2007 at 04:15 PM. Reason: forgot email
#2
New price on the block and crank $3500. Taking best offer on the BBC parts. Email me at SHabr66@aol.com
#5