For Sale: 411 HD Rear end with HD yokes, caps
#1
Race Director
Thread Starter
For Sale: 411 HD Rear end with HD yokes, caps
I have a 68 411 for sale. No pitting on housing, Very little backlash, both side yokes are about .030 end play, No leaks. Has AT 2 23 68 stamped on pad. Rear cover casting date is B 12 68. Center section casting date is K 7 7. $500 plus shipping or pickup. Sprayed down with PB Blaster to keep it from rusting. Pictures below.
Last edited by 63mako; 07-22-2007 at 01:01 AM.
#3
Race Director
Thread Starter
#4
Melting Slicks
Member Since: Feb 2001
Location: Europe , Luxembourg
Posts: 3,304
Likes: 0
Received 3 Likes
on
3 Posts
Hi
I could be interested.
Want to go from 3.70 to 4.11 due to the GM Viper T56 6 speed tranny, I installed. The 6th gear can only be used at 90 MPH now running at just 2000 RPM.
Does this tranny have a posi ? I somehow can't see the clutch pack.
Do you know how many Miles this rear end has ? Is the posi, if installed, still OK ? I think there is a torque check that can be done, isn't there ?
And is this a 4 series carrier, hence original 4.11 setup, not a aftermarket thicker 4.11 gear in a lower enfd carrier ?
Also I would like to know shipping cost to Seattle area , 98158.
Rgds. Günther
I could be interested.
Want to go from 3.70 to 4.11 due to the GM Viper T56 6 speed tranny, I installed. The 6th gear can only be used at 90 MPH now running at just 2000 RPM.
Does this tranny have a posi ? I somehow can't see the clutch pack.
Do you know how many Miles this rear end has ? Is the posi, if installed, still OK ? I think there is a torque check that can be done, isn't there ?
And is this a 4 series carrier, hence original 4.11 setup, not a aftermarket thicker 4.11 gear in a lower enfd carrier ?
Also I would like to know shipping cost to Seattle area , 98158.
Rgds. Günther
#5
Race Director
Thread Starter
Hi
I could be interested.
Want to go from 3.70 to 4.11 due to the GM Viper T56 6 speed tranny, I installed. The 6th gear can only be used at 90 MPH now running at just 2000 RPM.
Does this tranny have a posi ? I somehow can't see the clutch pack.
Do you know how many Miles this rear end has ? Is the posi, if installed, still OK ? I think there is a torque check that can be done, isn't there ?
And is this a 4 series carrier, hence original 4.11 setup, not a aftermarket thicker 4.11 gear in a lower enfd carrier ?
Also I would like to know shipping cost to Seattle area , 98158.
Rgds. Günther
I could be interested.
Want to go from 3.70 to 4.11 due to the GM Viper T56 6 speed tranny, I installed. The 6th gear can only be used at 90 MPH now running at just 2000 RPM.
Does this tranny have a posi ? I somehow can't see the clutch pack.
Do you know how many Miles this rear end has ? Is the posi, if installed, still OK ? I think there is a torque check that can be done, isn't there ?
And is this a 4 series carrier, hence original 4.11 setup, not a aftermarket thicker 4.11 gear in a lower enfd carrier ?
Also I would like to know shipping cost to Seattle area , 98158.
Rgds. Günther
Last edited by 63mako; 07-22-2007 at 11:51 PM.
#9
Melting Slicks
Member Since: Feb 2001
Location: Europe , Luxembourg
Posts: 3,304
Likes: 0
Received 3 Likes
on
3 Posts
Hello
Yes, sorry. I require a bit more time because I might be able to get one locally ( from Germany just around the corner ).
If this deal falls through and yours is still available, I will knock on your door again.
Thanks a lot & brgds. Günther
Yes, sorry. I require a bit more time because I might be able to get one locally ( from Germany just around the corner ).
If this deal falls through and yours is still available, I will knock on your door again.
Thanks a lot & brgds. Günther
#10
Race Director
Thread Starter
I understand completely, Shipping to you would be costly. Good luck.