Parts For Sale
#1
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Parts For Sale
Here is what I would like to offer for sale, first come, first served.
1. I have a GM 350 engine, block number is 3932388. Pulled this from my 1977 Corvette but it is not a stock corvette engine. 1969 Camaro engine most likely. Heads are 333882 74-80 350 with 76cc chambers, date code is L 7 6. I will post pictures of the heads shortly.
Includes HEI distributor, edelbrock performer intake manifold, aluminum valve covers and starter will come with the engine. $450 (pick up only please). Will sell some of the parts if you want them alone as follows.
2. GM 3942529LH exhaust manifold, 1969-1970. (SOLD)
3. GM 346222RH exhaust manifold, 1973-1980. (SOLD)
4. GM26, part number 6260233 TH350 transmission. $200.
5. GM 474207 LH Aluminum Valve Cover - $75 plus actual shipping costs.
6. GM 474208 RH Aluminum Valve Cover - $75 plus actual shipping costs. $125 for the set.
7. Edelbrock E1405 600cfm Square flange, manual choke carburator. -$150 plus actual shipping costs.
Pick up only please.
Thanks for looking. I will post a video of the car with the engine running just two months ago.
Feel free to PM me with questions or for more pictures.
David
77Sleeper
1. I have a GM 350 engine, block number is 3932388. Pulled this from my 1977 Corvette but it is not a stock corvette engine. 1969 Camaro engine most likely. Heads are 333882 74-80 350 with 76cc chambers, date code is L 7 6. I will post pictures of the heads shortly.
Includes HEI distributor, edelbrock performer intake manifold, aluminum valve covers and starter will come with the engine. $450 (pick up only please). Will sell some of the parts if you want them alone as follows.
2. GM 3942529LH exhaust manifold, 1969-1970. (SOLD)
3. GM 346222RH exhaust manifold, 1973-1980. (SOLD)
4. GM26, part number 6260233 TH350 transmission. $200.
5. GM 474207 LH Aluminum Valve Cover - $75 plus actual shipping costs.
6. GM 474208 RH Aluminum Valve Cover - $75 plus actual shipping costs. $125 for the set.
7. Edelbrock E1405 600cfm Square flange, manual choke carburator. -$150 plus actual shipping costs.
Pick up only please.
Thanks for looking. I will post a video of the car with the engine running just two months ago.
Feel free to PM me with questions or for more pictures.
David
77Sleeper
Last edited by AllC34Me; 01-31-2009 at 10:09 AM. Reason: More information on heads given.
#2
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
http://s404.photobucket.com/albums/p...t=P3020042.flv
Here is a short video of my 77 coupe with the engine I just pulled and am offering for sale. Engine was not original and I don't know how old it is or how many miles it had on it, but it ran well and had a nice lope. Let me know if you have any iterest, prices were posted previously and all are negotiable.
Best regards,
David Howard
77Sleeper
Here is a short video of my 77 coupe with the engine I just pulled and am offering for sale. Engine was not original and I don't know how old it is or how many miles it had on it, but it ran well and had a nice lope. Let me know if you have any iterest, prices were posted previously and all are negotiable.
Best regards,
David Howard
77Sleeper
Last edited by AllC34Me; 01-01-2009 at 09:38 PM.
#3
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Prices Reduced!!!
Not giving them away, but reducing after doing more research.
Give it a look and give me some feedback if prices are out of line please.
Thanks for looking.
David
Give it a look and give me some feedback if prices are out of line please.
Thanks for looking.
David
#4
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
ttt
Have removed the edelbrock carb and the valve covers from the motor.
Have reduced carb price to $100 plus actual shipping.
Have reduced valve covers to $50 each plus actual shipping.
Starter, water pump, HEI Distributor and fly wheel come with the block.
David
Have removed the edelbrock carb and the valve covers from the motor.
Have reduced carb price to $100 plus actual shipping.
Have reduced valve covers to $50 each plus actual shipping.
Starter, water pump, HEI Distributor and fly wheel come with the block.
David
Last edited by AllC34Me; 01-11-2009 at 01:30 PM.
#5
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Exhaust manifolds and tranmission are now sold. Engine as described above with Edelbrock carb, intake, water pump, fuel pump, starter, and aluminum valve covers can be had for $250 if you come and pick it up.
At this price it is almost a better deal for me to take it to the local junk yard and sell it for steel, but would rather see it used on a car and get some good service.
Let me know if you have any interest.
Thanks and best regards,
David
77Sleeper
At this price it is almost a better deal for me to take it to the local junk yard and sell it for steel, but would rather see it used on a car and get some good service.
Let me know if you have any interest.
Thanks and best regards,
David
77Sleeper
#7
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
The economy is very tough now and people are holding on to their hard earned dollars. It ran well for me, just not stock enough I guess for most Corvette owners. Wonder if there is a Camaro forum, they might like an original 69 Camaro block...now theirs an idea.
Thanks for helping me think it through.
David
77Sleeper
Thanks for helping me think it through.
David
77Sleeper
#8
Le Mans Master
David,
Can you post the rest of the numbers on that motor...date code, heads, any stampings on the pad.
I would think you could sell it quick on a Camaro forum if it proves to be a 69.
Can you post the rest of the numbers on that motor...date code, heads, any stampings on the pad.
I would think you could sell it quick on a Camaro forum if it proves to be a 69.
#9
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
I sure can when I return from travel, unfortunately heading to Europe in about 15 minutes and will not return for a week. I have pictures of and the numbers off the engine. With the engine out of the car I can get numbers from wherever, just need time to look them up and write them down, photograph them as well. Engine is out of the car now. I asked for help on the Forum earlier to see what the engine numbers meant before I elected to pull it out, I can run that down as well.
Thanks for your help.
David
Thanks for your help.
David
#11
Red Road Warrior
Member Since: Dec 2000
Location: Lansdale 19446 PA
Posts: 3,345
Received 282 Likes
on
199 Posts
St. Jude Donor '10-'11, '15, '19
Everyone - David (77 SLEEPER) asked me to post a note to this thread:
He is currently out of the country - left this morning. He is very interested in selling these parts but is not able to access the forum or communicate with buyers.
He will answer all replies when he returns the end of next week.
Thanks for looking & understanding.
John
He is currently out of the country - left this morning. He is very interested in selling these parts but is not able to access the forum or communicate with buyers.
He will answer all replies when he returns the end of next week.
Thanks for looking & understanding.
John
#12
Racer
Member Since: Aug 2006
Location: Near Zanesville Ohio
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
engine
which easton are we talking clarion or northampton county if just north of pittsburg I will take it for 250 if over near wilkes barr too far for me please pm me when you can and we can work out the details thank you Mike
#14
Melting Slicks
#15
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Thank you John for your help and for posting on my behalf, I appreciate it. I landed back in the US last night and I am time adjusting now. I apologize for posting items for sale prior to departing the country and causing confusion with two instant messages and two postings. I have to work today but promise tomorrow (Saturday) to sort out the order of the inquiries and see who committed to buy what first. I apologize for this but they all came in within four hours of one another and caught me heading for a plane. I will sort it out and respond to each and all.
For the record. I live in Northhampton County, as John said, and my zip code is 18045.
I currently do not own a truck or a vehichle that can move the engine so please understand the reason for asking buyers to pick it up is that I can lift it up and put it in a vehicle, and I have it on a crate and we can bolt it down to the crate, but I have no way of transporting it.
Shipping and transporting adds costs to my end, that is another reason I have tried to price the parts low enough to be worth a person to come and get it.
Having said that, I will sort out the requests and will respond by tomorrow.
Thank you for your interest and have a good day.
Best regards,
77Sleeper
David
PS: Thanks again John, I owe you.
David
For the record. I live in Northhampton County, as John said, and my zip code is 18045.
I currently do not own a truck or a vehichle that can move the engine so please understand the reason for asking buyers to pick it up is that I can lift it up and put it in a vehicle, and I have it on a crate and we can bolt it down to the crate, but I have no way of transporting it.
Shipping and transporting adds costs to my end, that is another reason I have tried to price the parts low enough to be worth a person to come and get it.
Having said that, I will sort out the requests and will respond by tomorrow.
Thank you for your interest and have a good day.
Best regards,
77Sleeper
David
PS: Thanks again John, I owe you.
David
#16
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Where would I locate the head numbers you referred too? I have the valve covers off the car but not certain exactly where to locate them. Be glad to get them, just need a little guidance.
Thanks for your help.
David
#17
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Okay, time issue sorted out, my apologies for making anyone wait. I had received a PM from a gentleman in Ohio prior to any interest posted here so I have written to him to see if he can come and pick up the parts. If he can and makes payment then the engine and parts will be sold. If he does not want them now or if he cannot come and get them then I will take the next person in line and see if we can make a deal. I hope to know shortly.
I will post again as soon as I can.
Also, details, but the sale of the transmission fell through so the TH350 is also available again if anyone knows anyone wanting it as well.
Thanks again.
David
77Sleeper
I will post again as soon as I can.
Also, details, but the sale of the transmission fell through so the TH350 is also available again if anyone knows anyone wanting it as well.
Thanks again.
David
77Sleeper
#18
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
This is getting fun. The engine is sitting on an engine crate that my new engine came in on but I can pick it up off to locate other numbers if I get tips where to look.
Best regards,
David
#19
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
You were number two and number one didn't buy the car and doesn't need the engine now, so you are first if interested.
Let me know when you can.
Best regards,
David Howard
77Sleeper
#20
Melting Slicks
Whole engine. That means block, HEI Distributor (installed), Edelbrock Performer Intake (installed), Edelbrock 600cfm Carburator (removed), aluminum valve covers (installed), starter (installed), with original water pump (removed). $450. If you come and pick it up $400 complete. I'll throw in the air cleaner assembly as well.
You were number two and number one didn't buy the car and doesn't need the engine now, so you are first if interested.
Let me know when you can.
Best regards,
David Howard
77Sleeper
You were number two and number one didn't buy the car and doesn't need the engine now, so you are first if interested.
Let me know when you can.
Best regards,
David Howard
77Sleeper