Have a higher stall converter in your 350 trans? You need this!
#1
Race Director
Thread Starter
Have a higher stall converter in your 350 trans? You need this!
REDUCED!! $60 shipped!
High stall converters generate additional heat. Your stock trans fluid cooling system was not designed to eliminate this increased heat. If you depend on your radiator to eliminate this it will elevate coolant temperatures and trans fluid will run hotter breaking down faster. This is the most common reason for trans failure. The solution is to increase fliud capacity and add additional cooling to the trans fluid.
I have a TH350 trans cooler pan that does just that. It is 3" deep and has 10 - 1/2" cooler tubes running through. It increases pan capacity by about 2 quarts and will drop trans temperatures by up to 50 degrees. Great for a higher stall convertor car. No running additional lines, buying a remote trans cooler or fabricating mounts. Bolt this on and go. It is heavy guage steel in excellent condition. No dents or flange warping, cleaned, primed and painted semi gloss black.
Send PM if interested.
High stall converters generate additional heat. Your stock trans fluid cooling system was not designed to eliminate this increased heat. If you depend on your radiator to eliminate this it will elevate coolant temperatures and trans fluid will run hotter breaking down faster. This is the most common reason for trans failure. The solution is to increase fliud capacity and add additional cooling to the trans fluid.
I have a TH350 trans cooler pan that does just that. It is 3" deep and has 10 - 1/2" cooler tubes running through. It increases pan capacity by about 2 quarts and will drop trans temperatures by up to 50 degrees. Great for a higher stall convertor car. No running additional lines, buying a remote trans cooler or fabricating mounts. Bolt this on and go. It is heavy guage steel in excellent condition. No dents or flange warping, cleaned, primed and painted semi gloss black.
Send PM if interested.
Last edited by 63mako; 07-01-2012 at 11:18 AM.
#2
Race Director
Thread Starter
Originally Posted by 63mako
Originally Posted by efurlong
Hi,
do you know what brand the pan is? I'd take it if it was a name brand high quality part...not interested in a cheap Chinese part...Thanks, ted
do you know what brand the pan is? I'd take it if it was a name brand high quality part...not interested in a cheap Chinese part...Thanks, ted
This was manufactured in Arvada, CO. It is in excellent condition and needs nothing. Back to the top.
#10
Hi, I have this on my TH350 in my Nova (it was already there when I bought it)
But now it's beginning to leak quite hard and I noticed it had no gasket, just silicone...
Where do I get the right gasket? I just cannot find anything ..
On the cooler stands just the patent no..
But now it's beginning to leak quite hard and I noticed it had no gasket, just silicone...
Where do I get the right gasket? I just cannot find anything ..
On the cooler stands just the patent no..
#11
Race Director
Hi, I have this on my TH350 in my Nova (it was already there when I bought it)
But now it's beginning to leak quite hard and I noticed it had no gasket, just silicone...
Where do I get the right gasket? I just cannot find anything ..
On the cooler stands just the patent no..
But now it's beginning to leak quite hard and I noticed it had no gasket, just silicone...
Where do I get the right gasket? I just cannot find anything ..
On the cooler stands just the patent no..