Parting out '68 coupe
#1
Former Vendor
Thread Starter
Parting out '68 coupe
Body and chassis sold.
New prices added.
Now parting out.
More photos here: http://smg.photobucket.com/albums/v6...%20for%20sale/ Pages 4 and 5
1) sold-- rolling chassis for sale, complete with brakes, rear pig, all suspension-----$1,700.00--Sold
2) SOLD Complete body with one piece front clip--remaining body panels and doors original and non hit/repaired/replaced. Front clip installed correctly/looks great---entire body in primer.---Body for sale---$2,500.00--Sold
4) Original seats, no head rests, good tracks, need covers-----$400.00
5) Rear interior quarter panels with courtesy lights (cp)----$400.00 OBO
6) SOLD---Pop out rear window--complete with glass, frame, halos, latches, trim bezels, gasket----$400.00SOLD
Have two more windows, a couple of trays, and misc. hardware.
7) Rear pop out window storage tray, fiberboard, complete with latch and hinges---$150.00
8) Rear Astro Ventilation assembly, complete with vacuum actuator and tubing-----$150.00
9) Top Dash, black, nice condition---------$175.00
10) left lower dash, black, nice condition----$175.00 bare-----$350.00 with speedo and tach
11) lower right dash ('68--no map pocket), black----$150.00
12) Seat belts, original, black, fair condition------------$150.00
13) seat belt guides, ('68 with 4 mounting holes), nice-----$75.00 per, or $125.00 for the pair.
14) door panels, black, good driver condition, all trim, original------$400.00
15) Center gauge bezel ('68--"smooth" finish), one "leg" broken, but hardly noticeable when installed----$175.00---$300.00 with gauges and clock.
16) '68 only wiper bezel, nice-------$100.00
17) Aluminum braces under top dash------$50.00
18) '68 only shift plate, 4 speed, no a/c------$150.00
19) '68 only heat/air control mechanism, complete with vacuum hoses/connections-----$125.00
20) Front vent cables and bracket-------------$150.00
21) '68 only kick panels, nice, black, no a/c----$50.00 per or $80.00 for both.
22) Sill plates, driver condition-------$25.00 for the pair
23) '68 only em. brake console, one small crack, black, Original------$125.00
24) forward console, driver condition----$100.00
25) Radio cover panels, forward or console, '68 only, $45.00 each, or $75.00 for the pair
26) windshield pillar posts, nice condition----$75.00
27) windshield header trim, nice condition----$70.00
28) T-Bar trim, nice----$90.00
29) T-Tops with nice black liners, good latches---$250.00
30) 4 speed pedal assembly-----$150.00
31) '68 only brake light switch (mounts on pedal assembly)----$125.00---have 3 of these.
32) All heater ducting-----$350.00 for all, or will sell individual pieces.
33) Inner heater box and control cables----$175.00
34) outer heater box and fan----$125.00
35) Vacuum tank---$125.00
36) windshield wiper door assembly, complete, nice condition, every little piece and part---$750.00---or will part out.
37) Reproduction front grills with parking light assemblies----$250.00-- or will sell pieces/parts.
37) original, '68 only center grill---$125.00
38) '68 only grill brackets---$225.00 for the set---or will sell individuals
39) Top of fender stainless, '68only----$150.00 pair, or $85.00 per
40)SOLD--- '68 only rear exhaust panel with reverse light assemblies----------$350.00---SOLD--Have extra reverse light assemblies--$100.00 per
41)SOLD-- '68 only fuel lid, correct riveted emblem, nice condition---$350.00---SOLD
42) I have plenty of windshield pillar post stainless, top of windshield stainless, and both cp. and conv. windshield header stainless---all of these pieces are '68 only.
43) '68 only headlight assemblies, both early (small door) and late, including '68 only "no hole" metal bezels. Complete assemblies with correct bezels---$850.00
44) front crossmember, '68 only, nice------$155.00
45) '68 and '68 front and rear bumpers, bumper support brackets, hardware, frame extensions, etc---Please inquire. All bumpers are original, some good driver condition, some re-chromed, some in need.
46) Gas tanks and braces and straps, and filler necks.
47) spare tire carriers, mounting hardware, locks
48) Ralley wheels--One original '68 AG code, Dated June of '68 (so for a rather late car)--Have 6, 7, 8 inch wheels, AZ, FB, DC, etc.
49) '68 only doors, both coupe and convertible, complete, shells, skins, locks, trim bezels, hardware, latches, rods, push button assemblies, etc.
50) a few dated side mirrors, many rear view mirrors and hardware (cp. and vert.)
51) Exhaust manifolds, brackets, pulleys, smog components, distributors, blocks, heads, intake manifolds, vacuum fittings, valve covers, front timing covers, oil pans, balancers, mufflers, pipes, hangers.
52) nice original '68 only exhaust tips---excellent---$250.00
53) Many more parts.
Thanks,
George
210 748 4693
geopar@gvtc.com
Body and frame rolling suspension are sold (pending payment)
New prices added.
Now parting out.
More photos here: http://smg.photobucket.com/albums/v6...%20for%20sale/ Pages 4 and 5
1) sold-- rolling chassis for sale, complete with brakes, rear pig, all suspension-----$1,700.00--Sold
2) SOLD Complete body with one piece front clip--remaining body panels and doors original and non hit/repaired/replaced. Front clip installed correctly/looks great---entire body in primer.---Body for sale---$2,500.00--Sold
4) Original seats, no head rests, good tracks, need covers-----$400.00
5) Rear interior quarter panels with courtesy lights (cp)----$400.00 OBO
6) SOLD---Pop out rear window--complete with glass, frame, halos, latches, trim bezels, gasket----$400.00SOLD
Have two more windows, a couple of trays, and misc. hardware.
7) Rear pop out window storage tray, fiberboard, complete with latch and hinges---$150.00
8) Rear Astro Ventilation assembly, complete with vacuum actuator and tubing-----$150.00
9) Top Dash, black, nice condition---------$175.00
10) left lower dash, black, nice condition----$175.00 bare-----$350.00 with speedo and tach
11) lower right dash ('68--no map pocket), black----$150.00
12) Seat belts, original, black, fair condition------------$150.00
13) seat belt guides, ('68 with 4 mounting holes), nice-----$75.00 per, or $125.00 for the pair.
14) door panels, black, good driver condition, all trim, original------$400.00
15) Center gauge bezel ('68--"smooth" finish), one "leg" broken, but hardly noticeable when installed----$175.00---$300.00 with gauges and clock.
16) '68 only wiper bezel, nice-------$100.00
17) Aluminum braces under top dash------$50.00
18) '68 only shift plate, 4 speed, no a/c------$150.00
19) '68 only heat/air control mechanism, complete with vacuum hoses/connections-----$125.00
20) Front vent cables and bracket-------------$150.00
21) '68 only kick panels, nice, black, no a/c----$50.00 per or $80.00 for both.
22) Sill plates, driver condition-------$25.00 for the pair
23) '68 only em. brake console, one small crack, black, Original------$125.00
24) forward console, driver condition----$100.00
25) Radio cover panels, forward or console, '68 only, $45.00 each, or $75.00 for the pair
26) windshield pillar posts, nice condition----$75.00
27) windshield header trim, nice condition----$70.00
28) T-Bar trim, nice----$90.00
29) T-Tops with nice black liners, good latches---$250.00
30) 4 speed pedal assembly-----$150.00
31) '68 only brake light switch (mounts on pedal assembly)----$125.00---have 3 of these.
32) All heater ducting-----$350.00 for all, or will sell individual pieces.
33) Inner heater box and control cables----$175.00
34) outer heater box and fan----$125.00
35) Vacuum tank---$125.00
36) windshield wiper door assembly, complete, nice condition, every little piece and part---$750.00---or will part out.
37) Reproduction front grills with parking light assemblies----$250.00-- or will sell pieces/parts.
37) original, '68 only center grill---$125.00
38) '68 only grill brackets---$225.00 for the set---or will sell individuals
39) Top of fender stainless, '68only----$150.00 pair, or $85.00 per
40)SOLD--- '68 only rear exhaust panel with reverse light assemblies----------$350.00---SOLD--Have extra reverse light assemblies--$100.00 per
41)SOLD-- '68 only fuel lid, correct riveted emblem, nice condition---$350.00---SOLD
42) I have plenty of windshield pillar post stainless, top of windshield stainless, and both cp. and conv. windshield header stainless---all of these pieces are '68 only.
43) '68 only headlight assemblies, both early (small door) and late, including '68 only "no hole" metal bezels. Complete assemblies with correct bezels---$850.00
44) front crossmember, '68 only, nice------$155.00
45) '68 and '68 front and rear bumpers, bumper support brackets, hardware, frame extensions, etc---Please inquire. All bumpers are original, some good driver condition, some re-chromed, some in need.
46) Gas tanks and braces and straps, and filler necks.
47) spare tire carriers, mounting hardware, locks
48) Ralley wheels--One original '68 AG code, Dated June of '68 (so for a rather late car)--Have 6, 7, 8 inch wheels, AZ, FB, DC, etc.
49) '68 only doors, both coupe and convertible, complete, shells, skins, locks, trim bezels, hardware, latches, rods, push button assemblies, etc.
50) a few dated side mirrors, many rear view mirrors and hardware (cp. and vert.)
51) Exhaust manifolds, brackets, pulleys, smog components, distributors, blocks, heads, intake manifolds, vacuum fittings, valve covers, front timing covers, oil pans, balancers, mufflers, pipes, hangers.
52) nice original '68 only exhaust tips---excellent---$250.00
53) Many more parts.
Thanks,
George
210 748 4693
geopar@gvtc.com
Body and frame rolling suspension are sold (pending payment)
Last edited by Corvettes by George; 08-18-2012 at 03:05 PM.
#5
Former Vendor
Thread Starter
Lenses, housings, or both.
Have all.
Lenses---perfect = $40.00 each
driver (light cracks, scratches) = $15.00 each
Housings--$30.00 each
G.
geopar@gvtc.com
Have all.
Lenses---perfect = $40.00 each
driver (light cracks, scratches) = $15.00 each
Housings--$30.00 each
G.
geopar@gvtc.com
#7
Instructor
Member Since: Apr 2010
Location: Speedville New York
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Lenses, housings, or both.
Have all.
Lenses---perfect = $40.00 each
driver (light cracks, scratches) = $15.00 each
Housings--$30.00 each
G.
geopar@gvtc.com
Have all.
Lenses---perfect = $40.00 each
driver (light cracks, scratches) = $15.00 each
Housings--$30.00 each
G.
geopar@gvtc.com
can you just send me a picture to bigdogandy21@yahoo.com
Im looking for the housing and evreything
#8
Former Vendor
Thread Starter
I have several '68 steering wheels that have one or two small cracks (repairable).
I may have one or two steering wheels that are nice. Need to check it out.
G
#9
Instructor
Member Since: Apr 2010
Location: Speedville New York
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Im looking for both, I need the center one and the speedo+tach
#13
Former Vendor
Thread Starter
Update--
Body and chassis sold.
Radiator and electric fan sold.
Good stuff still for sale:
Engine and tranny
'68 reverse light switch at brake pedal
headlight assemblies
tele steering column parts
grill brackets
reverse lights
rear window storage tray complete with hinges and forward clip
Seat belt guides
Spare tire carrier and '68 only (short) bolts
Thanks,
George
geopar@gvtc.com
210 748 4693
Body and chassis sold.
Radiator and electric fan sold.
Good stuff still for sale:
Engine and tranny
'68 reverse light switch at brake pedal
headlight assemblies
tele steering column parts
grill brackets
reverse lights
rear window storage tray complete with hinges and forward clip
Seat belt guides
Spare tire carrier and '68 only (short) bolts
Thanks,
George
geopar@gvtc.com
210 748 4693
#14
George, PM'd you on the rear valance, very interested the following as well:
12) Seat belts, original, black, fair condition------------$150.00
13) seat belt guides, ('68 with 4 mounting holes), nice-----$75.00 per, or $125.00 for the pair.
Please send pics to msockwel <at> aol dot com
12) Seat belts, original, black, fair condition------------$150.00
13) seat belt guides, ('68 with 4 mounting holes), nice-----$75.00 per, or $125.00 for the pair.
Please send pics to msockwel <at> aol dot com
#19
Former Vendor
Thread Starter
$90.00 for the latches.
What brackets do you need?
Do you need the bezels, halo panels, window, window tray and/or hinges/rear cowl hinge supports, inserts, gasket?
geopar@gvtc.com
What brackets do you need?
Do you need the bezels, halo panels, window, window tray and/or hinges/rear cowl hinge supports, inserts, gasket?
geopar@gvtc.com