Parting out '68 convertible
#1
Former Vendor
Thread Starter
Parting out '68 convertible
Long story short:
Father and son purchase '68 convertible in need, realized that too many dollars were going to be needed to put in good condition, asked me to help sell.
Will post photos later. Link to photobucket: http://smg.photobucket.com/albums/v663/435rdster/Dannys%2068%20parting%2
Car and parts located in South Central Texas, near San Antonio.
Big items:
1) Frame is sold
2) SOLD--- Cowl back convertible body (a/c car--4 sp.)--Nice birdcage/rocker channels/nice cowl, floors/nice rear body panels,--SOLD
new gas tank---$125.00
3) SOLD---SOLD---Complete hard top---Stainless/glass/weather stripping/liner/latches, etc.---$700.00
4) SOLD---Soft top frame, no rust, needs canvas and weatherstripping----$650.00---SOLD I have a couple more.
5) Wiper door assembly---mechanism/door/grill with early '68 wiper nozzles/stainless trim and top of fender trim pieces/actuator/over ride switch/under dash over ride set-up/ etc., etc.---$650.00---not all items in photo, but all components here. Have extra pieces---grills, doors, stainless, mechanisms, vacuum cans, switches, nozzles, brackets, etc., etc. Call or e-mail with needs.
6) '68 head light assemblies--Early, small door, metal bezels (no washer holes--'68 only)---Complete assembly--"U" braces, headlight doors, bezels, actuators---$1,000.00
"U" braces -----$150.00 per
Headlight doors--$175.00 per
Bezels---$200.00 per
Actuators---$45.00 per
7) Bumpers---Original front bumper, bumperettes, and both rears---Good driver chrome/condition---$400.00 for the set of 5 pieces--will split up
Two 4 speed drive shafts with yokes----$75.00 each (Yokes worth this price.)
New gas tank filler neck/cap-overflow cup---$75.00
Vacuum storage tank (two port) new paint---$100.00
A/C radiator support------$200.00--SOLD--Have another and a non a/c support
Metal fan shroud----$75.00---Sold one, have another
SOLD--- and '68 only lower shroud--$125.00---SOLD
Early '68 2 piece top receivers (on corners of windshield frame)---$200.00--sold one set, have another
'68 only top of windshield frame stainless (no mounting holes)/nice---$200.00
Early 1st design "smooth" door handles---$125.00---Sold one set, have another.
'68 door push buttons with trim bezels---$125.00 each--sold a couple, have a couple left.
'68 only door lock mechanisms---$100.00 each--sold two lefts, have a few right and left yet to sell.
Left dash, black, 6000 red line tach (327/350hp) and speedo---$175.00
Right dash '68 only, no map pocket---$100.00
'68 only interior pieces---2 sets of forward console extensions---$35.00 per piece
Convertible rear quarter panel interior trim----$150.00 each--Sold---working on another pair----Have complete cp. panels with courtey lamp assemblies available.
Convertible windshield header trim---$75.00
'68 steering column trim pieces (two sets)---$100.00 per set--Sold some--have more.
Bumper brackets--(all), and some extras---$10.00 to $75.00
Front "U" brace----$125.00--Sold ---have others.
4 speed pedal assembly and braces (no brake light switch)---$125.00--Sold one---have more.
'68 only brake light switch---$125.00---Sold two, have two more.
Rear view mirror and mounting bracket (convertible)---$50.00
'68 "smooth" gauge bezel (broken at thin areas) and green faced gauges---$150.00
Front parking light grills ('69 style) with lights and Chrome "hockey" sticks---$150.00 for the set, or split up--Sold--have some more.
'68 outer door handles (fair) $10.00 per, inner door lock ***** $5.00, 4 of the control rods-$10.00 per, one window handle $5.00, two of the spacers that go between the window handle and the door panel $5.00 per, and a couple of the access plates $10.00 small, $20.00 large-
4 '68 tail light lenses (no cracks)---$105.00 for all or $40.00 per--Sold a few, have a few more.
4 nice derby caps----$35.00 each---Sold a set---Have more.
'68 only wiper motor---$125.00--Sale pending--Have a couple more.
5 drop down air cleaner bases (350hp)---$50.00 each--Sold one.
2 chrome air cleaner lids (need chrome) $25.00 each
All wiring harnesses---dash, front lights, engine compartment, rear lights and fiver optics---I need to inspect these for completeness---will price when condition is determined. Do have extra sockets/partial harness pieces/etc. for those of you who need a piece or part. Have sold a few pieces and parts, have a lot more.
Side marker lights and brackets (4)---$25.00 for the set
'68 only reverse light housings/pigtails--$75.00 each ($125.00 pair)
'68 gas pedal, bracket, and cable assembly---$100.00--'68 only, hard to find.
4 speed shifter and linkage, with mount bracket, and rear trans bracket---$200.00 for the assembly--Sold one, have a few more.
2 4 speed shift plates ('68 only)---$100.00 per---Gone---might have another coning in.
2 sets of rocker moldings (lower fiberglass and upper stainless trim)-- fair condition----$140.00 per set
Smog pump and diverter valve, and one side hose/check valve/exhaust tube ---need to check numbers and Julian date-- will price when determined.
"Z" bar and clutch rod----$50.00
'69 steering wheel---$75.00---Sold.
Have 5 more---4 are perfect ($100.00)
top piece of ignition shielding and a couple of the side and spark plug pieces---$50.00
2 radio ground plates---$10.00 per
1 early, '68 only "square" cornered rear ventilation grill---These are difficult to find---$75.00
Pile of center cowl braces, brackets, and the seat belt and shoulder belt under body reinforcements---all powder coated--Will sell all for $200.00 or split up
Spare tire tub assembly---top/bottom/correct bolts (6" for '68)---nice condition------$150.00
SOLD--Front crossmember, '68 only, powder coated, nice----$125.00--SOLD
Extra headlight lid--later '68---$100.00
Misc. A/C components---boxes/compressor/condenser/brackets/drier/etc.
Early radio---need to check if it's '68 or '69 and if it's mono or stereo---Will price when determined.
All prices are OBO.
1) SOLD---Convertible body/title-------$2,500.00---SOLD
2) SOLD--- Hard top-------------------$ 700.00---SOLD
3) Soft top-------------------$ 900.00
4) wiper door assembly--------$ 650.00
5) early '68 headlight asmbs.---$ 700.00
6) bumper set-----------------$ 400.00
parts not listed/priced ( smog, a/c components (braces, compressor, ducting,
'68 only center air deflector, etc.) ,
wiring,
steering col./wheel,
bumper braces/brackets,
2nd left lower dash w/speedo/tach,
'74 exp. tank (aluminum),
headlight shields,
hood, hood latches and support,
rear compartment doors,
power brake booster
, master cylinder (correct with bleeders),
horn,
em. brake handle assembly,
door hinges and new springs,
splash shields,
headlight support bar,
top surround reinforcement bar,
top dash braces,
door mirror,
'68 only wiper arms.
Thanks,
George
210 748 4693
geopar@gvtc.com
Father and son purchase '68 convertible in need, realized that too many dollars were going to be needed to put in good condition, asked me to help sell.
Will post photos later. Link to photobucket: http://smg.photobucket.com/albums/v663/435rdster/Dannys%2068%20parting%2
Car and parts located in South Central Texas, near San Antonio.
Big items:
1) Frame is sold
2) SOLD--- Cowl back convertible body (a/c car--4 sp.)--Nice birdcage/rocker channels/nice cowl, floors/nice rear body panels,--SOLD
new gas tank---$125.00
3) SOLD---SOLD---Complete hard top---Stainless/glass/weather stripping/liner/latches, etc.---$700.00
4) SOLD---Soft top frame, no rust, needs canvas and weatherstripping----$650.00---SOLD I have a couple more.
5) Wiper door assembly---mechanism/door/grill with early '68 wiper nozzles/stainless trim and top of fender trim pieces/actuator/over ride switch/under dash over ride set-up/ etc., etc.---$650.00---not all items in photo, but all components here. Have extra pieces---grills, doors, stainless, mechanisms, vacuum cans, switches, nozzles, brackets, etc., etc. Call or e-mail with needs.
6) '68 head light assemblies--Early, small door, metal bezels (no washer holes--'68 only)---Complete assembly--"U" braces, headlight doors, bezels, actuators---$1,000.00
"U" braces -----$150.00 per
Headlight doors--$175.00 per
Bezels---$200.00 per
Actuators---$45.00 per
7) Bumpers---Original front bumper, bumperettes, and both rears---Good driver chrome/condition---$400.00 for the set of 5 pieces--will split up
Two 4 speed drive shafts with yokes----$75.00 each (Yokes worth this price.)
New gas tank filler neck/cap-overflow cup---$75.00
Vacuum storage tank (two port) new paint---$100.00
A/C radiator support------$200.00--SOLD--Have another and a non a/c support
Metal fan shroud----$75.00---Sold one, have another
SOLD--- and '68 only lower shroud--$125.00---SOLD
Early '68 2 piece top receivers (on corners of windshield frame)---$200.00--sold one set, have another
'68 only top of windshield frame stainless (no mounting holes)/nice---$200.00
Early 1st design "smooth" door handles---$125.00---Sold one set, have another.
'68 door push buttons with trim bezels---$125.00 each--sold a couple, have a couple left.
'68 only door lock mechanisms---$100.00 each--sold two lefts, have a few right and left yet to sell.
Left dash, black, 6000 red line tach (327/350hp) and speedo---$175.00
Right dash '68 only, no map pocket---$100.00
'68 only interior pieces---2 sets of forward console extensions---$35.00 per piece
Convertible rear quarter panel interior trim----$150.00 each--Sold---working on another pair----Have complete cp. panels with courtey lamp assemblies available.
Convertible windshield header trim---$75.00
'68 steering column trim pieces (two sets)---$100.00 per set--Sold some--have more.
Bumper brackets--(all), and some extras---$10.00 to $75.00
Front "U" brace----$125.00--Sold ---have others.
4 speed pedal assembly and braces (no brake light switch)---$125.00--Sold one---have more.
'68 only brake light switch---$125.00---Sold two, have two more.
Rear view mirror and mounting bracket (convertible)---$50.00
'68 "smooth" gauge bezel (broken at thin areas) and green faced gauges---$150.00
Front parking light grills ('69 style) with lights and Chrome "hockey" sticks---$150.00 for the set, or split up--Sold--have some more.
'68 outer door handles (fair) $10.00 per, inner door lock ***** $5.00, 4 of the control rods-$10.00 per, one window handle $5.00, two of the spacers that go between the window handle and the door panel $5.00 per, and a couple of the access plates $10.00 small, $20.00 large-
4 '68 tail light lenses (no cracks)---$105.00 for all or $40.00 per--Sold a few, have a few more.
4 nice derby caps----$35.00 each---Sold a set---Have more.
'68 only wiper motor---$125.00--Sale pending--Have a couple more.
5 drop down air cleaner bases (350hp)---$50.00 each--Sold one.
2 chrome air cleaner lids (need chrome) $25.00 each
All wiring harnesses---dash, front lights, engine compartment, rear lights and fiver optics---I need to inspect these for completeness---will price when condition is determined. Do have extra sockets/partial harness pieces/etc. for those of you who need a piece or part. Have sold a few pieces and parts, have a lot more.
Side marker lights and brackets (4)---$25.00 for the set
'68 only reverse light housings/pigtails--$75.00 each ($125.00 pair)
'68 gas pedal, bracket, and cable assembly---$100.00--'68 only, hard to find.
4 speed shifter and linkage, with mount bracket, and rear trans bracket---$200.00 for the assembly--Sold one, have a few more.
2 4 speed shift plates ('68 only)---$100.00 per---Gone---might have another coning in.
2 sets of rocker moldings (lower fiberglass and upper stainless trim)-- fair condition----$140.00 per set
Smog pump and diverter valve, and one side hose/check valve/exhaust tube ---need to check numbers and Julian date-- will price when determined.
"Z" bar and clutch rod----$50.00
'69 steering wheel---$75.00---Sold.
Have 5 more---4 are perfect ($100.00)
top piece of ignition shielding and a couple of the side and spark plug pieces---$50.00
2 radio ground plates---$10.00 per
1 early, '68 only "square" cornered rear ventilation grill---These are difficult to find---$75.00
Pile of center cowl braces, brackets, and the seat belt and shoulder belt under body reinforcements---all powder coated--Will sell all for $200.00 or split up
Spare tire tub assembly---top/bottom/correct bolts (6" for '68)---nice condition------$150.00
SOLD--Front crossmember, '68 only, powder coated, nice----$125.00--SOLD
Extra headlight lid--later '68---$100.00
Misc. A/C components---boxes/compressor/condenser/brackets/drier/etc.
Early radio---need to check if it's '68 or '69 and if it's mono or stereo---Will price when determined.
All prices are OBO.
1) SOLD---Convertible body/title-------$2,500.00---SOLD
2) SOLD--- Hard top-------------------$ 700.00---SOLD
3) Soft top-------------------$ 900.00
4) wiper door assembly--------$ 650.00
5) early '68 headlight asmbs.---$ 700.00
6) bumper set-----------------$ 400.00
parts not listed/priced ( smog, a/c components (braces, compressor, ducting,
'68 only center air deflector, etc.) ,
wiring,
steering col./wheel,
bumper braces/brackets,
2nd left lower dash w/speedo/tach,
'74 exp. tank (aluminum),
headlight shields,
hood, hood latches and support,
rear compartment doors,
power brake booster
, master cylinder (correct with bleeders),
horn,
em. brake handle assembly,
door hinges and new springs,
splash shields,
headlight support bar,
top surround reinforcement bar,
top dash braces,
door mirror,
'68 only wiper arms.
Thanks,
George
210 748 4693
geopar@gvtc.com
Last edited by Corvettes by George; 10-14-2013 at 02:46 PM.
#3
Safety Car
George-I need a 68 driver side a/c vent housing. The piece that runs under the steering column from the console to the deflector. Any?
#5
Instructor
bump
I have this same suspension package on my 68 Vert with an LS1 engine and it is the best driving and handling of the 5 C3's I have owned. It would make a great Restomod!
I have this same suspension package on my 68 Vert with an LS1 engine and it is the best driving and handling of the 5 C3's I have owned. It would make a great Restomod!
#6
Melting Slicks
Member Since: Feb 2001
Location: Europe , Luxembourg
Posts: 3,304
Likes: 0
Received 3 Likes
on
3 Posts
Hi
I could do with the very front crossmember 68 only and the 68 wiper motor inclusive the washer pump ( we already spoke about long time ago ) .
Shipping possibly to Huston ( IAH ) , but will have to speak to my colleague there first . Otherwise, shipping to Luxembourg in Europe.
Rgds. Günther
I could do with the very front crossmember 68 only and the 68 wiper motor inclusive the washer pump ( we already spoke about long time ago ) .
Shipping possibly to Huston ( IAH ) , but will have to speak to my colleague there first . Otherwise, shipping to Luxembourg in Europe.
Rgds. Günther
#7
Racer
Member Since: Jul 2000
Location: Traverse City, Mi
Posts: 281
Likes: 0
Received 1 Like
on
1 Post
St. Jude Donor '12
Early '68 2 piece top receivers (on corners of windshield frame)---$200.00--sold one set, have another
Please let me know if they are available.
Thank you
Shawn
#13
hi george. i am puting back together a 68 big block tri power without air. maNY PREVIOUS SHOPS HAVE TOUCHED IT AND MOVED IT. what i am looking for are all of the 5 or six cowl brackets and the base some of them attach to..bernie 4162558164
#15
Former Vendor
Thread Starter
#18
Drifting
Don't mean to be a bother but I am still wanting to get the steering hub. Please contact me. Been trying for a while to catch up with you.