Notices
C3 Parts for Sale/Wanted C3 Corvette Performance Parts, Rare NOS and NLA Chevy Parts, Wheels & Tires, Exterior Enhancements, Aftermarket
Sponsored by:
Sponsored by:

'68--'72 parts

Thread Tools
 
Search this Thread
 
Old 11-01-2016, 05:22 PM
  #261  
Buliwyf EU
Cruising
 
Buliwyf EU's Avatar
 
Member Since: Dec 2011
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

Hello George,
With all due respect to you, I do not understand this situation. You write that you have the item I'm looking for. After my ask about the price, you do not answer anything. If you are interested in selling, please specify the price, if not, write me that you do not have such an element. Then I'll look elsewhere and I will not bother neither your, nor mine head. I do not understand this drag of time. I did not write earlier because I thought that perhaps you were not available, you left etc.
But looking at the statistics of the forum you have been present even today and have not found the time to write back to my message stating the price ??? It is incomprehensible to me.

Regards
Mariusz
Old 11-10-2016, 07:27 PM
  #262  
MuzkGuy
Instructor
 
MuzkGuy's Avatar
 
Member Since: Sep 2012
Location: Sherman Oaks CA
Posts: 101
Received 7 Likes on 5 Posts
Default

I need the passenger side chrome mirror....IF it's still tight and not wobbly. Do you have? If so, how much to send to Los Angeles area?
Old 11-12-2016, 09:06 AM
  #263  
SCALF
Burning Brakes
 
SCALF's Avatar
 
Member Since: Sep 1999
Location: Leland NC
Posts: 1,126
Received 3 Likes on 3 Posts
Cruise-In I Veteran
Cruise-In II Veteran

Default

Looking for lower tilt steering shaft for a 1972, George
Old 12-04-2016, 10:43 PM
  #264  
49panrider
Intermediate
 
49panrider's Avatar
 
Member Since: Jun 2013
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts

Default 1968

hood latch and a front liecence plate holder for a 1968 shipped to 1840 Greencedar Ln Winston Salem NC 27127
Old 12-05-2016, 07:22 AM
  #265  
0Corvettes by George
Former Vendor
Thread Starter
 
Corvettes by George's Avatar
 
Member Since: Mar 2011
Location: spring branch Texas
Posts: 6,219
Received 152 Likes on 101 Posts
Default

Originally Posted by 49panrider
hood latch and a front liecence plate holder for a 1968 shipped to 1840 Greencedar Ln Winston Salem NC 27127
Hood latch---male or female, left or right?
Old 12-05-2016, 09:07 AM
  #266  
49panrider
Intermediate
 
49panrider's Avatar
 
Member Since: Jun 2013
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts

Default Hood prop and front plate holder

Originally Posted by 1960fi
Hood latch---male or female, left or right?
My fault, I mint hood prop, and front plate holder. Thanks Ronnie
Old 12-05-2016, 10:38 AM
  #267  
0Corvettes by George
Former Vendor
Thread Starter
 
Corvettes by George's Avatar
 
Member Since: Mar 2011
Location: spring branch Texas
Posts: 6,219
Received 152 Likes on 101 Posts
Default

Originally Posted by 49panrider
hood latch and a front liecence plate holder for a 1968 shipped to 1840 Greencedar Ln Winston Salem NC 27127
I should have both.
Will PM u pricing
G
Old 12-06-2016, 12:15 PM
  #268  
02Ragtopvette
Intermediate
 
02Ragtopvette's Avatar
 
Member Since: Aug 2013
Posts: 48
Received 2 Likes on 2 Posts
Default

Looking for a set of deck lid latches for a 1971 convertible top on a 1971.
Wiper switch and mounting housing no AC. Gauge cluster housing. Shifter plate 4-speed no A/C. 4-speed shifter with linkage. Wiper door trim. All shipped to 67156.
Old 12-06-2016, 06:45 PM
  #269  
Lobzila
Pro
 
Lobzila's Avatar
 
Member Since: Feb 2014
Posts: 598
Received 105 Likes on 86 Posts
Default

George,
I need a LH hood latch for a 68.
Pricing shipped to 92054.
Thanks Ed
Old 12-06-2016, 09:52 PM
  #270  
Lonestar88
Cruising
 
Lonestar88's Avatar
 
Member Since: Oct 2016
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

Hello,

Wondering if you still have the floor pan and would it work for a 76?

Thanks.
Old 12-15-2016, 06:07 PM
  #271  
Tripower delight
Instructor
 
Tripower delight's Avatar
 
Member Since: Feb 2014
Posts: 205
Received 13 Likes on 11 Posts
Default

Im interests in the exhaust parts. Do you have a complete system for a big block 2.5 size pipes
Old 12-16-2016, 12:52 PM
  #272  
David in NC
Instructor
 
David in NC's Avatar
 
Member Since: May 2016
Location: Chapel Hill NC
Posts: 112
Received 9 Likes on 9 Posts
Default

do you have a seat back, drivers side, 69, saddle color?
want in excellent condition
thanks
Old 01-09-2017, 04:27 AM
  #273  
waterspit
Cruising
 
waterspit's Avatar
 
Member Since: Nov 2016
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default shifter console plate

Hi George,
I need a shifter console plate with AC,auto, early 69 or early 70.
Thanks
LM
Old 01-09-2017, 10:15 PM
  #274  
ChromeBumperGuy
Racer
 
ChromeBumperGuy's Avatar
 
Member Since: Jul 2016
Location: Forsyth Illinois
Posts: 476
Received 322 Likes on 142 Posts
Default

Pm sent. Looking for spare tire tub for '71. Thx!

Originally Posted by 1960fi
I should have both.
Will PM u pricing
G
Old 01-15-2017, 05:48 PM
  #275  
Mikesmetalbumpercars
Intermediate
 
Mikesmetalbumpercars's Avatar
 
Member Since: Nov 2016
Location: NC
Posts: 28
Received 2 Likes on 2 Posts
Default

George,

I need a set of complete 1968 seats without headrest. I need late style with high latch. Good shape that just need new covers, maybe tracks and backs that can be cleaned up. Thanks, Mike
Old 02-22-2017, 11:51 AM
  #276  
68bigblock
Instructor
 
68bigblock's Avatar
 
Member Since: May 2002
Location: Savannah GA
Posts: 216
Received 2 Likes on 2 Posts

Default

Do you have a hood prop for a 71? If so send me a pm
Thanks!
Old 03-02-2017, 11:21 PM
  #277  
shark1312
Intermediate
 
shark1312's Avatar
 
Member Since: Jul 2007
Location: kuwait
Posts: 44
Likes: 0
Received 0 Likes on 0 Posts

Default 72 Bumper

Looking for 1972 nice rear bumper..how much shipped to 07094 NJ ,please ??
Originally Posted by 1960fi
Rear bumpers, better condition than photo shows, these can be used as nice drivers, no rust, not bent, originals.
$75.00 per have several
Have all bumper brackets $5.00 to $10.00 per




Removable rear glass storage trays--fiberboard.
Both need repair, but both work as is.

$45.00 per

Have a set of spring hinges for these---$40.00 pair




'68/9 floor coupe pan/trans tunnel/rear clip halo.

$150.00 (pick up only)





Spare tire tubs and lids.

Nice ones (no cracks or rash) $100.00

Ones with cracks or small damage---$60.00

Have mounting hardware---'68 only $70.00---'69/'75 $35.00





Rally wheels, 15x8, original, mixed dates, all AZ---$50.00 per

Some aluminum slot wheels, 15", various widths (8", 8 1/2", 10", maybe some wider?)--$50.00 per

Chromed "Daiseys" 15x10 --$50.00 per




'68 birdcage. nice, no rust, excellent rocker channels and posts. Has had the windshield frame removed.

$250.00 (pick up only)




Windshield wiper door pieces and complete units (some '68 only, some for '69-'72)

Grills-----------$100.00

Doors----------$125.00

Mechanisms----$225.00

Long stainless--$100.00

Fender caps----$50.00 pair---$75 pair for '68

Coffee can actuators--$50.00 --$100.00 depending on condition of plating (all work)

Pie pan actuators $ same as above

Misc. brackets --$5.00 to $10.00

'68 wiper arms--$50.00 per Do not have any '69 arms with brass tubes)

Wiper transmissions--$75.00

'68 wiper motors---$100.00 per

'69 wiper motors with headlight washer set up---$250.00

all components for under dash controls (pull down switches, override switches, mounting brackets---$5.00 to $40.00

Dash mounted wiper switches---$20.00

'68 only upper vent bezels (where wiper switch mounts) $50.00 also have '69-'75

Solenoid behind tachometer---$50.00 (all tested and work)







Vents, ducting, fans, vacuum reservoirs--$15.00 to $80.00








Front and rear sway bars (different sizes, not all photographed)--$50.00 to $100.00








4-speed and automatic pedal assemblies ('68 and '69-'75)
'68 4-speed--$150.00
all others---- $125.00
'68 only brake light switch---$125.00




Complete rear---1969 427 Heavy duty positraction ---assembled, rebuilt---center posi, half shafts, trailing arm assemblies, rear spring, upper cross-member, rear sway bar, rear calipers, shocks.

This is an FA coded 3:70.1 posi with 7 leaf rear spring and bolted half-shafts (not the "U" strap attachment).

Asking $1,500.00 (can ship, but large and heavy and require crating)







Fiberboard rear compartment doors---$20.00 to $35.00 per




Trailing arm assemblies, A-Arms, Power Brake Boosters, Front spindle assemblies (small --'68 and earlier)---$50.00 t0 $250.00 (not all shown in photograph)




Center caps for ralley wheels, all original, most in excellent condition, some need paint touch-up.
1) nice ones---$30.00
2) good drivers-$20.00
3) needing touch-up--$15.00
Have 40 or 50 of these.




Trim rings--have 50 or so

New in the box GM issue with clips rotated off of valve stem hole--$100.00 per or $350.00 for set of four (OBO)

Nice originals---(early design) --$125.00 per

small dents or curb rash early originals--$50.00 per

Nice 2nd design originals-----$ 100.00 per

Driver 2nd design originals---$ 40.00 per

After market rings--$10.00 per




Exhaust pipes and mufflers (new), some 2" some 2 1/2"---$30.00 to $60.00 Many more not photoed.




Gas tanks (with and without return line nipples), filler neck assemblies, vented and non vented caps, many more not shown.
Some look as new, but even the ones with light surface (on outside only) are clean and sound.

1) Tanks---$75.00

2) filler neck assemblies--$50.00

3) caps) ---$10.00 to $50.00

Also have straps, original bolts, tank support brackets, and fuel door lids/assemblies (sorry no Original '68 only doors with emblem rivets in place).





Original tail light panels (have 4 or 5)---$225.00 per




'68 frame with rear trailing arm assemblies. Cowl back coupe body, nice windshield frame, rockers, up-rights. Rear fenders and tail light panel removed.
Straight frame, surface rust, (think this is a 4 speed frame, covered in my shipping boxes now)----Asking $2,000.00 with body, $1,500.00 without OBO. Also have nice set of '68 doors








Oil Pans---$50.00 to $250.00




Front and rear bumper brackets, extensions, etc. (not all shown)---$5.00 to $50.00 per




Front bumpers and bumpperettes----$100.00 to $400.00




Rear springs

1) 7 leaf from a '67 big block---$125.00

2) 9 leafs ---$75.00




Transmissions (look up my other ads for complete coding) $550.-- to $750.00




Early dated '68 (1967 dates for a '68 427) big block water pump, alternator and starter.

1)---SOLD--- water pump---$125.00---SOLD---have two more

2) alternator-----$200.00

3)---SOLD--- starter--------$200.00---SOLD




'69 original side pipe pieces and parts including good insulators, some pieces re-chromed)----$50.00 to $200.00 (not all pieces shown)




'69 to '75 steering wheels----$50.00 to $100.00 (not all shown).




Wiring harnesses, '68 and '69, a/c and non, all with good fiber optics and all complete.

1) engine----$50.00

2) front light w/optics---$125.00

3) '68 dash with a/c-----$200.00

4) '68 dash w/o a/c-----$175.00

5) '69 dash with a/c----$175.00

6) '69 dash w/o a/c-----$150.00

7) '68 and/or '69 rear lights with fiber optics---$100.00

Have mics harnesses---p/w, '68 rear interior lights with housings/lenses, clips, sockets, plugs, etc., etc.




More to come,
George
210 748 4693[img]resource://skype_ff_extension-at-jetpack/skype_ff_extension/data/call_skype_logo.png[/img]210 748 4693
geopar@gvtc.comCall
Send SMS
Add to Skype
You'll need Skype CreditFree via Skype
Old 03-03-2017, 09:11 AM
  #278  
0Corvettes by George
Former Vendor
Thread Starter
 
Corvettes by George's Avatar
 
Member Since: Mar 2011
Location: spring branch Texas
Posts: 6,219
Received 152 Likes on 101 Posts
Default

shark1312:
Which side do you need?

Please delete your post or edit to remove the copied photos of my original post in order to save band with here on the Forum site.

In future responses just use the "quick" reply, or e me or text me.

Thanks,
George
geopar@gvtc.com
210 748 4693



Quick Reply: '68--'72 parts



All times are GMT -4. The time now is 04:48 PM.