FS: New Fully race ported alum SBC heads
#1
Instructor
Thread Starter
FS: New Fully race ported alum SBC heads
Selling a complete set of new fully race ported sbc aluminum heads. Heads have extensive hand portwork to the intake runner, exhaust runner and chambers. Heads come complete with 2.02 intake valves and 1.60 exhaust, titanium retainers, valve springs setup for a hyd roller setup, 64cc chambers and 210cc runners, heads flow @.650 310cfm int and 235cfm exh.
I can send pictures to those interested, heads are completely new, went LS and no longer need.
$1100
email me at krazedz@yahoo.com
Thanks
Tony
I can send pictures to those interested, heads are completely new, went LS and no longer need.
$1100
email me at krazedz@yahoo.com
Thanks
Tony
#4
Drifting
#8
Drifting
Just Beautiful, the heads alone, without the porting, I think would cost you more than you are asking, I had my Iron heads worked over last year on my 97 block with a Corvette roller cam, The added power is just great. Good Luck on your sale.
#9
Drifting
Pretty sure those are Pro Comp heads and the port work looks outstanding.
#10
Veteran
I had a pair of Pro Comps once, I say once! Mine were junk, but my father in law has a set for about 8 years now no problem. They are the best Chinese manufactured cylinder heads exported from China to Australia then imported to California from there. I paid 1000 for mine 8 years ago and they were not ported but were set up for a roller. So $1100 for a set of ported heads is pretty good price.
Last edited by King Lear; 12-09-2014 at 09:42 PM.
#11
Drifting
Yup the problem is usually with porous castings-sometimes they have to be filled and gone over again-doesn't look to be an issue with the OP's heads-All that porting would have revealed any porosity and even if there was some porous areas he filled them in successfully it seems.
#12
Instructor
Thread Starter
The old pro comp elect were bad when they first were introduced, aluminum was soft and porous, very similar to the c4 aluminum heads gm put out in production, but after about 3 years they have improved on their casting. The ports were nothing fancy and just a copy of a standard chevy runner.
These are out of Australia, alittle different in their intake runner floor area, very similar to a pro filer/afr/rhs, but for the most part in the same category as pro comp. The quality is very good
So any fears of them failing would be the same as if they were any of the other aftermarket heads.
These are out of Australia, alittle different in their intake runner floor area, very similar to a pro filer/afr/rhs, but for the most part in the same category as pro comp. The quality is very good
So any fears of them failing would be the same as if they were any of the other aftermarket heads.
#13
Drifting