jhudec

Hi again,
Today I am looking for an original fan clutch for my early 69' small block. All these old clutches need to be rebuilt if they have not been used in some time, so price accordingly. It is a couple of hundred to get it rebuilt. Anyway, I only need the clutch and it should have the following dimensions.

Hub mounting= 1-3/4" bolt circle
Fan clutch-to-fan= 3" bolt circle
Fan blade center hole= 2-3/8"

Let me know if anyone has anything lying around.

Joe

DBanks

Joe, these units are easy enough to find. I'm inclined to instruct you to find an original dated unit and not restamp during the restoration process. There is no need to and you'll sleep better at night knowing you did the ethical practice of not condoning restamps.

Dan

jhudec

Fair enough, let's see what anyone comes up with........

The Phantom

I'm pretty sure I have one from my 71, let me check tomorrow and I'll let you know.

Dave

jhudec

Thanks, Let me know. Please check the dimensions as for 1971 may have a
Fan clutch-to-fan= 3 1/4" bolt circle and needs to be 3".

Joe

jhudec

ttt

sgt kohler

will one from a 77 work? I just took mine off and changed it but the old one was working good . I know why did I change it, because I didn't realize it was just the old original thermostat that was not working. you can have this one if it works on your car.

basketcase69

Hey Joe, I sent you a PM.

jhudec

I need the SC clutch, an original. It needs to 68 - 70 style clutch.
Answered pm's. Just about any 45 yr clutch is going to need rebuilding. I have purchased these in the past
and they all needed rebuilt.
I have no problem with that, please help.

TTT

jhudec

Still looking for a reasonably priced clutch.
Thanks everyone.
Joe

mark6669

I have one part# 5389475 date 353 67 very nice cond. I'm sure it needs rebuilding $100 plus $12 shipping.
Mark

jhudec

Still looking. I appreciate everyone that has gotten back to me on this. I am still looking, but I have a budget for this clutch. I can get a very nice reproduction clutch for about $200. I costs $200 plus to rebuild a used clutch, so my budget is around $50 for a used clutch. Even at that after all is said and done I will have $300 in it.
So, if anyone wants to let one go for my price let me know, as I have some time to make a decision.
Thanks again,
Joe

jhudec

TTT
I am now hearing that the reproduction clutch (americas finest) are having manufacturing issues, so not available at this time.
So, I am on the hunt again. See the original dimensions in the post.
Anyone have a reasonably priced fan clutch? I may have to expand my budget a bit.
Hub mounting= 1-3/4" bolt circle
Fan clutch-to-fan= 3" bolt circle
Fan blade center hole= 2-3/8"

Thanks,
Joe

jhudec

TTT
I am now hearing that the reproduction clutch (americas finest) are having manufacturing issues, so not available at this time.
So, I am on the hunt again. See the original dimensions in the post.
Anyone have a reasonably priced fan clutch? I may have to expand my budget a bit.
Hub mounting= 1-3/4" bolt circle
Fan clutch-to-fan= 3" bolt circle
Fan blade center hole= 2-3/8"

OK, opened up my budget for this clutch. Anyone have one?

Thanks,
Joe

jhudec

TTT
I am now hearing that the reproduction clutch (americas finest) are having manufacturing issues, so not available at this time.
So, I am on the hunt again. See the original dimensions in the post.
Anyone have a reasonably priced fan clutch? I may have to expand my budget a bit.
Hub mounting= 1-3/4" bolt circle
Fan clutch-to-fan= 3" bolt circle
Fan blade center hole= 2-3/8"

OK, opened up my budget for this clutch. Anyone have one?

Thanks,
Joe

jhudec

Ttt

wilesre

Does this seem right-ish?

http://i777.photobucket.com/albums/y...psdmkdjo31.jpg

Came off my 70.

jhudec

Please send me pics of both sides.
Send to
Jhudec2001@yahoo.com

Thanks...........

wilesre

jhudec

Thanks, but that is a replacement clutch.
Thanks, but I cannot use it.