What do you think about this product?
#1
Melting Slicks
Thread Starter
Member Since: Nov 2002
Location: of mind
Posts: 2,371
Likes: 0
Received 0 Likes
on
0 Posts
What do you think about this product?
I'm looking at the Jacobs Electronics Nitrous Mastermind in Summit. It says it will:
1. Prevent detonation by retarding timing on nitrous
2. Ends burned pistins by shutting off nitrous if feul pressure drops
3. Stops destructive overrevving with a feather-touch rpm limiter
4. Prevents nitrous from turning on under a set rpm
Sells for $225. Seems like cheap insurance. Anyone have experience with this?
1. Prevent detonation by retarding timing on nitrous
2. Ends burned pistins by shutting off nitrous if feul pressure drops
3. Stops destructive overrevving with a feather-touch rpm limiter
4. Prevents nitrous from turning on under a set rpm
Sells for $225. Seems like cheap insurance. Anyone have experience with this?
#2
Drifting
Msd SELLS similar stuff.
Window switch keeps No2 on only at set rpms... timing delay box will give you the RETARD...
fuel pressure senor/cutoff I didnt have that one... I used a mechanical gauge on my Camaro to watch my fuel pressure.
Sounds like a good setup though
Window switch keeps No2 on only at set rpms... timing delay box will give you the RETARD...
fuel pressure senor/cutoff I didnt have that one... I used a mechanical gauge on my Camaro to watch my fuel pressure.
Sounds like a good setup though
Last edited by holley505; 09-23-2005 at 02:02 PM.