Find Me an Oil Fill Extention Tube
#1
Pro
Thread Starter
Find Me an Oil Fill Extention Tube
I posted this originally in "General" and then got to thinking that the Tech types who pound through the parts catalogs may have bumped into one of these.
What I'm looking for (they used to be a dime a dozen) is a bayonet mount oil fill tube that mounts to the valve cover and then is capped by the regular oil fill cap (also bayonet mount). This allows an easier pour from a quart of oil over the top of the brake booster, etc.
10 years ago these things were everywhere but I've had zero success finding them in Jeg's, Summit or the Mr. Gasket (who I thought used to make them) pdf catalog.
Ya, I can go the funnel route, but this was one less thing to clean...
Anyone,
Thanks,
kdlp
What I'm looking for (they used to be a dime a dozen) is a bayonet mount oil fill tube that mounts to the valve cover and then is capped by the regular oil fill cap (also bayonet mount). This allows an easier pour from a quart of oil over the top of the brake booster, etc.
10 years ago these things were everywhere but I've had zero success finding them in Jeg's, Summit or the Mr. Gasket (who I thought used to make them) pdf catalog.
Ya, I can go the funnel route, but this was one less thing to clean...
Anyone,
Thanks,
kdlp
#2
Race Director
Member Since: Feb 2002
Location: Compound in the Grove, Ga.
Posts: 11,329
Received 910 Likes
on
583 Posts
2020 C3 of the Year Finalist - Unmodified
2019 C4 of Year Finalist (performance mods)
2018 C4 of Year Finalist
2015 C4 of the Year Finalist
St. Jude Donor '16
2020 C3 of the Year Finalist - Unmodified
If you have the L82 type valve covers use a filler off the 82 Crossfire.
Last edited by FASTAZU; 05-22-2006 at 07:34 AM.