Vacuum diagrams for 1981 corvette with Cruse Control.
10-26-2006, 01:17 AM
#1
Advanced
Thread Starter
Member Since: Mar 2006
Location: Perth Western Australia
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Vacuum diagrams for 1981 corvette with Cruse Control.
Hi dose anyone have nay vacuum diagrams or any other information that can help me figure out it my vacuum system is hooked up correctly. 
I have cruse control and also have the TH350 Auto transition. I do NOT have all the air pollution stuff. However I do still have some parts such as the PCV valves on the rocker covers. I also have all the AC stuff connected and working.
I no longer am using the computer controlled Carb but switched to an earlier quadrajet . Very happy with that so far.
Thanks
I have cruse control and also have the TH350 Auto transition. I do NOT have all the air pollution stuff. However I do still have some parts such as the PCV valves on the rocker covers. I also have all the AC stuff connected and working.
I no longer am using the computer controlled Carb but switched to an earlier quadrajet . Very happy with that so far.
Thanks
10-26-2006, 05:30 AM
#2
Pro
Member Since: May 2003
Location: Nottingham
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
I put together some notes on troubleshooting this system, ages ago now. It's located here
I don't think there are any very clear diagrams of the vacuum pipes, except for a couple of service manual pages I included, but I have described what each pipe does, and how to test it - should give you a start.
Cheers
Theo
I don't think there are any very clear diagrams of the vacuum pipes, except for a couple of service manual pages I included, but I have described what each pipe does, and how to test it - should give you a start.
Cheers
Theo
