Carburetor bolt torque
#1
Carburetor bolt torque
can someone tell me what the torque is for
the 4 main bolts on the Q-jet to manifold?
my AIM shows where its supposed to be but
the numbers and whether its inch or foot lbs
is completely faded
the 4 main bolts on the Q-jet to manifold?
my AIM shows where its supposed to be but
the numbers and whether its inch or foot lbs
is completely faded
#4
Melting Slicks
I just did this recently and if I remember correctly on a Q-Jet it is 140 inch lbs. Make sure you snug each bolt down evenly before torquing them.
#5
Melting Slicks
Member Since: Mar 2006
Location: Orange Park Fl
Posts: 2,426
Likes: 0
Received 0 Likes
on
0 Posts
I don't usually pull out the torque wrench for this one but supervette77 is right that you need to snug them evenly. I usually use a nut driver (screwdriver handle on a socket). That's fairly safe. You can crack a quadrajet's body pretty easily with a socket wrench (ask me about the bead of JB Weld running down the front of the one on my big block.) God bless, Sensei