What is the best way to eliminate CARB loading??
#4
Team Owner
Thread Starter
Re: What is the best way to eliminate CARB loading?? (Jack Sweet)
Don't know what kind of carb you have, but you may have a float level problem.
#5
Race Director
Member Since: Nov 2000
Location: Waterloo ontario Canada
Posts: 11,872
Likes: 0
Received 9 Likes
on
9 Posts
Re: What is the best way to eliminate CARB loading?? (Alwyn678)
Loading has got to be caused by running too rich. Foat level can effect this, leaking internal, wrong or blown power valve or too rich an idle setting or circuit
#6
Le Mans Master
Re: What is the best way to eliminate CARB loading?? (norvalwilhelm)
If you do a lot of starts in the garage/ driveway and run for a short time, you may want to try a hotter spark plug. :)
#7
Team Owner
Thread Starter
Re: What is the best way to eliminate CARB loading?? (mikeo)
If you do a lot of starts in the garage/ driveway and run for a short time, you may want to try a hotter spark plug. :)
#8
Racer
Member Since: Sep 2000
Location: Valdosta Georgia
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
Re: What is the best way to eliminate CARB loading?? (Alwyn678)
Alwayn678, Check your float level and also your fuel pressure. Edelbrocks will flood on more than 6lbs of pressure. Hershey :chevy
#9
Le Mans Master
Member Since: Feb 1999
Location: Hoosier
Posts: 6,807
Likes: 0
Received 0 Likes
on
0 Posts
Cruise-In III Veteran
Re: What is the best way to eliminate CARB loading?? (Hershey)
Alwayn678, Check your float level and also your fuel pressure. Edelbrocks will flood on more than 6lbs of pressure. Hershey :chevy
#10
Race Director
Re: What is the best way to eliminate CARB loading?? (Hershey)
Hershey,
I have Edelbrock 750. I plan to install regulator tomorrow....My engine is also running rich....The question I have for you is.....Screwing the Idle mixture screws in makes the mixture rich or lean?....Thanks in advance for your answer. Also what's the procedure for setting idle mixture?.....:seeya
I have Edelbrock 750. I plan to install regulator tomorrow....My engine is also running rich....The question I have for you is.....Screwing the Idle mixture screws in makes the mixture rich or lean?....Thanks in advance for your answer. Also what's the procedure for setting idle mixture?.....:seeya
#11
Race Director
Re: What is the best way to eliminate CARB loading?? (Alwyn678)
years ago (1990) i had everything tuned properly, but the plugs were black. got electronic ignition and plugs are clean and light tan.
#12
Team Owner
Thread Starter
Re: What is the best way to eliminate CARB loading?? (drives61)
years ago (1990) i had everything tuned properly, but the plugs were black. got electronic ignition and plugs are clean and light tan.