Phil Zell

Hi all, just removed my TH-400 and installed an older M-20 muncie, question is what kind of speedometer cable setup do I need.

The TH-400 attached on the driver side of the transmission and the muncie attaches on the passenger side of tranny.

Thanks to all, and have a good weekend

Phil Zell

bump

Phil Zell

ttt

jr105

I don't know what year you have or if you have cruise control so I can't be specific, but your best bet is to go to one of the corvette parts websites (I like Willcox) and put in your year and configuration. The site will tell you what you need. I recently changed the cable in my 1981 4-speed and the cable came out of the passenger side of the tranny went forward and up over the bellhousing then through a grommet in the firewall.

Phil Zell

Thanks, sounds like a plan