windshield install
#1
Heel & Toe
Thread Starter
Member Since: Apr 2009
Location: williamstown nj
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
windshield install
hey everyone im a little lost here...... im getting ready to install my windshield. its for a 76. first question... the upper moulding on my car had the clips glued in. my frame does not have any holes for the clips. do i make the holes and put the clips in? zip says you need 13 i counted 10 across the top. i know the sides get screwed in with phillps head screws. and also the corners use phillips. i just need to be pointed in the right direction pictures would be nice... my car is early 76 production. please help.......
#2
I have the same year, early '76. Do those clips hold down somehow with the T-Top moulding across the upper windshield header and the w/s moulding 'grabs' onto the remaining exposed clip?
Dano,
Dano,
#3
Burning Brakes
Here ya go. 10 on mine
@Korevette, no the T trim is independent from these clips. They should be screwed to the header.The small trim piece has bended tabs with a sort of hem to thicken it so they clip
Nick
@Korevette, no the T trim is independent from these clips. They should be screwed to the header.The small trim piece has bended tabs with a sort of hem to thicken it so they clip
Nick
#4
Team Owner
Member Since: Sep 2006
Location: Westminster Maryland
Posts: 30,173
Likes: 0
Received 2,878 Likes
on
2,515 Posts
Hi d,
Nice looking windsheld frame and ss trim!!!!
Regards,
Alan
Nice looking windsheld frame and ss trim!!!!
Regards,
Alan
#5
Former Vendor
Member Since: Aug 2006
Location: Jeffersonville Indiana 812-288-7103
Posts: 76,656
Received 1,813 Likes
on
1,458 Posts
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15
hey everyone im a little lost here...... im getting ready to install my windshield. its for a 76. first question... the upper moulding on my car had the clips glued in. my frame does not have any holes for the clips. do i make the holes and put the clips in? zip says you need 13 i counted 10 across the top. i know the sides get screwed in with phillps head screws. and also the corners use phillips. i just need to be pointed in the right direction pictures would be nice... my car is early 76 production. please help.......
http://willcoxcorvette.com/advanced_...&keywords=clip
#6
Instructor
Member Since: Oct 2006
Location: Monroe Washington
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
hey everyone im a little lost here...... im getting ready to install my windshield. its for a 76. first question... the upper moulding on my car had the clips glued in. my frame does not have any holes for the clips. do i make the holes and put the clips in? zip says you need 13 i counted 10 across the top. i know the sides get screwed in with phillps head screws. and also the corners use phillips. i just need to be pointed in the right direction pictures would be nice... my car is early 76 production. please help.......
Ron
http://www.speakeasy.org/~pws/Corvette.htm
#7
Heel & Toe
Thread Starter
Member Since: Apr 2009
Location: williamstown nj
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
thanks alot for the help guys. so i guess just buy the clips and screws and make my own holes? cause my frame has no holes and no sign of holes being there ever. and i know the car was never taken apart until me.