1982 Corvette crossfire flooding.
08-04-2011, 07:06 PM
#21
Melting Slicks
Member Since: Jul 2005
Location: Aurora Ontario
Posts: 2,740
Likes: 0
Received 0 Likes
on
0 Posts
Remove the white connector on the ECM and clean it. Thats the one for the engine light. Clean both connectors while you are at it.
Pin 20 on the white connector is the light. Should go on with a test light put to it. If not everything suggests bad connections, bad ground or bad ECM.
Pin 20 on the white connector is the light. Should go on with a test light put to it. If not everything suggests bad connections, bad ground or bad ECM.
Last edited by jdp6000; 08-04-2011 at 07:16 PM.
