1971 LT-1 Cam Specs?
#4
Race Director
That may be a modern day replacement cam for the LT1 but the original had way more duration than that. It wa a long duration low lift solid cam. Not really a good cam for modern day engines. It needs a high compression piston and rpm to really work well.
Lookimg arond the duration at .050 is more like 242/252. Those are the numbers that are more like it.
Lookimg arond the duration at .050 is more like 242/252. Those are the numbers that are more like it.
Last edited by Gordonm; 09-19-2011 at 09:08 PM.
#5
Le Mans Master
Duration at .050" is 242/254, lift .459"/ .485". To give you an idea of how it compares to a hydraulic cam, doing the math the durations are 231/239. Decent cam for 10.5:1 compression when using the stock exhaust manifolds. If you run headers you can increase your cam selection.
#6
Race Director
Member Since: Apr 1999
Location: CORVETTE 77 385 C.I. TEXAS
Posts: 11,520
Likes: 0
Received 12 Likes
on
12 Posts
The cam specs. posted earlier are listed for 3972178.
another source gmpartsdirect
3972178 Mechanical Flat Tappet 70-71
(ID#3972182) duration at .050" tappet lift (intake/exhaust) is 242/254; and maximum lift with 1.5:1 rocker ratio (intake/exhaust) is 435/455. Valve lash is 024/030 and lobe centerline is 116 degrees.
(& in their chart as
I:.E:.455"
E: 435")
another source gmpartsdirect
3972178 Mechanical Flat Tappet 70-71
(ID#3972182) duration at .050" tappet lift (intake/exhaust) is 242/254; and maximum lift with 1.5:1 rocker ratio (intake/exhaust) is 435/455. Valve lash is 024/030 and lobe centerline is 116 degrees.
(& in their chart as
I:.E:.455"
E: 435")