Edelbrock 1406 issues after vortec head and intake upgrades
#1
Advanced
Thread Starter
Member Since: Sep 2011
Location: Midlothian Texas
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Edelbrock 1406 issues after vortec head and intake upgrades
Please help if you can!!
Original 81 350ci with 1406, Headers, Vacuum HEI. CCC stuff had been previously removed. Car ran great.
Just upgraded to vortec heads and Performer RPM intake. Nothing else changed. Now if I stab the throttle at 1500rpm, the car nose dives, almost dies, stumbles for a few seconds, then runs like a raped ape. All of this happens within 3 seconds.
I'm guessing it's the carb, but did not think these upgrades would change things this drastically.
Any help is appreciated!!
Thanks,
Jeff
Original 81 350ci with 1406, Headers, Vacuum HEI. CCC stuff had been previously removed. Car ran great.
Just upgraded to vortec heads and Performer RPM intake. Nothing else changed. Now if I stab the throttle at 1500rpm, the car nose dives, almost dies, stumbles for a few seconds, then runs like a raped ape. All of this happens within 3 seconds.
I'm guessing it's the carb, but did not think these upgrades would change things this drastically.
Any help is appreciated!!
Thanks,
Jeff
#4
Advanced
Thread Starter
Member Since: Sep 2011
Location: Midlothian Texas
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the help!
I took the easy way out and traded a guy my carb + $40, and he gave me a Holley 3310-6.
Wow what a difference!
Thanks,
Jeff
I took the easy way out and traded a guy my carb + $40, and he gave me a Holley 3310-6.
Wow what a difference!
Thanks,
Jeff