distributor recommendation 69.
03-13-2012, 07:40 PM
#2
Just remember that your '69 tach is cable driven from the distributor. If you swap to HEI you'll either need to get one that's been retrofitted with a tach drive cable output or you'll need to switch out your tach for a '75 or up electronic tach. HEI has many benefits and I think you'll like it a lot.
03-13-2012, 08:27 PM
#3
Race Director
The E Bay distributor is cheap and actually a good piece...just make sure the tach drive is on it...and then get a new set of 8MM wires from your local parts store to fit the Vette...A set for a 75 will work
03-14-2012, 02:25 AM
#4
Le Mans Master
Get a AAA towing plan for as far as you intend to drive your Vette for when the Chinese electronic module gives up the ghost when your out for a drive.
I would run a Pertronix module inside stock Delco tach drive myself.
I would run a Pertronix module inside stock Delco tach drive myself.
03-14-2012, 07:09 AM
#5
Safety Car
Thats all I buy and they have never broke down on me, so just because your against money saving chinese parts doesn't make them junk.
03-14-2012, 08:21 AM
#7
03-14-2012, 10:26 AM
#8
Team Owner
Member Since: Jun 2000
Location: Southbound
Posts: 38,928
Likes: 0
Received 1,468 Likes
on
1,247 Posts
Cruise-In II Veteran
Rebuild your original tach drive distributor. Add the Pertronix.
