3th crank pully PS wheel on SBC
#1
Safety Car
Thread Starter
3th crank pully PS wheel on SBC
Hi,
My 69 convertible is a non PS car.
I've got everything to upgrade to PS car now.
BUT the only thing is was missing was the 3th pulley Wheel, so I bought a losse 3th pully Wheel, but someting is wrong.
I assume the Wheel I bought is to scarp now?
Also what do I have to buy?? (the Water pumpe is a std. SBC 69, but will be changed to Edelbrock 8810)
Is it something like this?
http://www.summitracing.com/int/part...make/chevrolet
Diameter is 170mm (6.6")
Thx
My 69 convertible is a non PS car.
I've got everything to upgrade to PS car now.
BUT the only thing is was missing was the 3th pulley Wheel, so I bought a losse 3th pully Wheel, but someting is wrong.
I assume the Wheel I bought is to scarp now?
Also what do I have to buy?? (the Water pumpe is a std. SBC 69, but will be changed to Edelbrock 8810)
Is it something like this?
http://www.summitracing.com/int/part...make/chevrolet
Diameter is 170mm (6.6")
Thx
Last edited by c3_dk; 12-22-2014 at 06:10 AM.
#2
Safety Car
Is it something like this?
.........http://www.summitracing.com/int/part...make/chevrolet
Diameter is 170mm (6.6")
Thx
.........http://www.summitracing.com/int/part...make/chevrolet
Diameter is 170mm (6.6")
Thx