Plug wires for bb hei hooker headers
#1
Race Director
Thread Starter
Member Since: Mar 2003
Location: Eustis ( Area 51 Bat Cave ) Fl
Posts: 11,608
Received 772 Likes
on
645 Posts
Plug wires for bb hei hooker headers
So I am guessing someone has the same set up I do, hooker side pipes, hei and bb,
Which plug wires fit good out of the box, I am lazy do not want to cut and fit them...
thanks!
PS...please do post a picture of how they look on your engine....
Which plug wires fit good out of the box, I am lazy do not want to cut and fit them...
thanks!
PS...please do post a picture of how they look on your engine....
#2
Melting Slicks
Member Since: Apr 2006
Location: Airdrie Alberta
Posts: 2,084
Likes: 0
Received 11 Likes
on
10 Posts
Not sidepipes but 2" Headman headers, HEI and MSD 8.5 wires.
I found the straight boots interfere in a number of spots
#7 hits the reverse lockout cable
#3 hits the brake line at the proportioning valve
#4 touches the header tube
I will probably buy some 45 degree ends and change a few
I found the straight boots interfere in a number of spots
#7 hits the reverse lockout cable
#3 hits the brake line at the proportioning valve
#4 touches the header tube
I will probably buy some 45 degree ends and change a few
#3
Burning Brakes
Not sidepipes but 2" Headman headers, HEI and MSD 8.5 wires.
I found the straight boots interfere in a number of spots
#7 hits the reverse lockout cable
#3 hits the brake line at the proportioning valve
#4 touches the header tube
I will probably buy some 45 degree ends and change a few
I found the straight boots interfere in a number of spots
#7 hits the reverse lockout cable
#3 hits the brake line at the proportioning valve
#4 touches the header tube
I will probably buy some 45 degree ends and change a few
I have hooker side pipes and MSD wires. I have issues with #1 and #3 making contact.
#4
Melting Slicks
Member Since: Apr 2006
Location: Airdrie Alberta
Posts: 2,084
Likes: 0
Received 11 Likes
on
10 Posts
Your wires appear to be the MSD multi angle boots. Try bending that boot at the center and see if it retains the bent shape.
Thanks!, worked like a charm... my wife always says i should read the instructions LOL
#5
Race Director
After having tried many different wires, my favs are MSD 8.5 with the vari-angle boots (like the poster above).
Spend the extra time and cut-to-fit. The end result will be much nicer.
Spend the extra time and cut-to-fit. The end result will be much nicer.