Which bonding adhesive for metal to fiberglass??
#22
Racer
3m part 8609 is listed as bonding Window glass to body
Rod,
I rebonded the headlight support using 3M Super Fast Urathane Part# 08609. This stuff is awesome.
I was instructed to use this stuff by a very reputable Vette restorer. He has used it for years with no problems.
You can buy this stuff at any 3M dealer. I got mine at Advance Auto.
Stew
I rebonded the headlight support using 3M Super Fast Urathane Part# 08609. This stuff is awesome.
I was instructed to use this stuff by a very reputable Vette restorer. He has used it for years with no problems.
You can buy this stuff at any 3M dealer. I got mine at Advance Auto.
Stew
#24
Racer
Found the West product
I recently did this same project. I had the rivet pops on the front end of my 72 I wanted gone. When I put it back together, I used West Six10. It's a 2 part mix that comes in a single tube just like standard caulk. It's mixed as it's dispensed. West sells a caulk gun designed for this tube, but you can make it work with a standard caulking gun. You just have to convince the tube to go into the gun. One tube was more than enough to do the header bar, cost me about $20, and I'm thrilled with it.