scottred80

Hi guys sorry I havent posted in awhile thought I would share my new costom gauge cluster I made made an aluminum insert for the gauges .

thegazman

Is your fuel gauge fairly accurate and what gauge number did you use?

scottred80

Fuel gauge is 90 Ohms ATM-1315 and is accurate , I checked the orginal before disassembly and had 1/2 tank and was on the money , went and filled it up and showed full

cardo0

Looks gorgeous. Red stripe is nice touch. I can think of better ideas for the clock hole though but im sure u has much easier access now to swap it if desired.

Thx for sharing.

rcread

Nice work!

Paul L

Very nicely done!

kanvasman

So are the small torq head screws just for looks, or are they holding anything in place. Really looks great and finishes the dash off the way it should be. Thanks for sharing and giving us something else for our TO DO LISTS. How about some more details, pics. Great job.

gdh

Nice work, are you going to do your speedo and tack as well?

Sniper4x4

Looks clean congrats

Hale584

Very nice!

C3_ERROR

Is the tach broken or are the gauges not working? It looks like it's at idle.

In any case they look nice. I like the red stripe.

Dirk76

Do you have any work log pics and how too. Looks great.
Any pics further back?

I am going blue outside with a black interior, and was looking at ways to bring a little blue to the inside.

GaToy

If you can afford it you can get blue or any other color gauges you want from speedhut.com.

GaToy

Are these the 2 1/16" gauges? They look bigger.

TedH

Tach needle on my '80 always sits +/- 1,000rpm when the car is off. Must be something in the wiring. Would be great to get this in 'kit' form with new speedometer/tach cluster. I've looked at the Dakota Digital kit and that seems like the kit. Any info appreciated!