Rob72

I recently noticed I was leaking gas on start up coming from accelerator pump. I took accelerator pump off to replace diaphragm which looked good and replace with new one, only to discover the accelerator umbrella check valve torn apart. How and what parts do I need to fix this 4150 holley,thanks for any help, Bob

J T

It might help to know the model year of the Corvette so this thread can be moved to a more appropriate section.

This section is for Help with the website (account issues, software questions, etc.). Each generation of Corvette has their own section on this website to ask technical questions. Once you provide the year, I will move the thread because this section is not for corvette technical questions.

Rob72

Ok thanks, 72 corvette

PAmotorman

http://www.summitracing.com/parts/hl...JrNBoCr-Tw_wcB

Rob72

Thanks, do you just take fuel bowl ?

PAmotorman

yes remove the float bowl, put a little oil on the stem and pull it thru the hole. trim off the excess stem so it does not hit the float.

Rob72

I have a new gasket, do you use sealer or just dry fit?

PAmotorman

do you mean the float bowl gasket if you do install it dry

Rob72

Yes float bowl gasket, thanks for all your help.

7t9l82

Never ever ever use gasket sealant of any type on any carburetor. Never a good thing