New heads old temp. sensor--my answer
03-12-2003, 08:18 PM
#1
Racer
Thread Starter
Member Since: Apr 2001
Location: Golden Colo.
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
New heads old temp. sensor--my answer
A short time ago I posted a question concerning new head install with a 3/8 in. tap for the temp. sensor when our orginal sensors are 1/2 in. I searched high and low but could not find the correct fitting. So I made my own. If anyone is interested here's some pics.
Top view looking down. Still has clearance around sensor tip for coolent. Since sensor is mounted at slight angle shouldn't be any problem with air being trapped.
Top view looking down. Still has clearance around sensor tip for coolent. Since sensor is mounted at slight angle shouldn't be any problem with air being trapped.
03-13-2003, 08:13 PM
#2
Racer
Thread Starter
Member Since: Apr 2001
Location: Golden Colo.
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
Re: New heads old temp. sensor--my answer (82zoom)
ttt
I know some members were interested on the out-come from a earlier post so I'll take to the top just in case they missed it.
I know some members were interested on the out-come from a earlier post so I'll take to the top just in case they missed it.
