New 406 build up
#1
Instructor
Thread Starter
Member Since: Sep 2003
Location: Part breakage is just weakness leaving my Stingray
Posts: 119
Likes: 0
Received 1 Like
on
1 Post
New 406 build up
since I broke the crank and destroyed the block of my last 406 its time to start building up a new one.
450-500 HP
500+ TQ
These numbers are easy with this motor but I would like to hear what you guys have to say about the parts that you used and liked.
I've still got some parts from the old motor
Heads Edelbrock RPM
Carb Holley 750
Distributor MSD w/ mechanical tach drive and 6AL
intake Edelbrock performer
450-500 HP
500+ TQ
These numbers are easy with this motor but I would like to hear what you guys have to say about the parts that you used and liked.
I've still got some parts from the old motor
Heads Edelbrock RPM
Carb Holley 750
Distributor MSD w/ mechanical tach drive and 6AL
intake Edelbrock performer
#5
Melting Slicks
My 406 is good for at least 500hp,though never dynoed. Overall a great street combination,though when the time comes I plan on switching to a solid cam.Tons of info on my website.