looking to purchase 1968, 1969 corvette project 5 to 8500 range project (son and I)
#1
Pro
Thread Starter
looking to purchase 1968, 1969 corvette project 5 to 8500 range project (son and I)
looking for a good 1968 or 1969 veto project for my son and I
I am ok if car is not numbers matching or if it is a roller
i only need car to not be piece of shi# and have good title.
My son is 13 and really wants one of these cars
I am in iowa but will travel a ways or pay shipping
thanks aaron
I am ok if car is not numbers matching or if it is a roller
i only need car to not be piece of shi# and have good title.
My son is 13 and really wants one of these cars
I am in iowa but will travel a ways or pay shipping
thanks aaron
#2
Melting Slicks
looking for a good 1968 or 1969 veto project for my son and I
I am ok if car is not numbers matching or if it is a roller
i only need car to not be piece of shi# and have good title.
My son is 13 and really wants one of these cars
I am in iowa but will travel a ways or pay shipping
thanks aaron
I am ok if car is not numbers matching or if it is a roller
i only need car to not be piece of shi# and have good title.
My son is 13 and really wants one of these cars
I am in iowa but will travel a ways or pay shipping
thanks aaron
#4
Melting Slicks
I have a nice 69 coupe all original drive train, no rust, very solid. lots of new parts. 11k
#5
Senior Member
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
looking for a good 1968 or 1969 veto project for my son and I
I am ok if car is not numbers matching or if it is a roller
i only need car to not be piece of shi# and have good title.
My son is 13 and really wants one of these cars
I am in iowa but will travel a ways or pay shipping
thanks aaron
I am ok if car is not numbers matching or if it is a roller
i only need car to not be piece of shi# and have good title.
My son is 13 and really wants one of these cars
I am in iowa but will travel a ways or pay shipping
thanks aaron
Has to be something fun out there you can get.
Best of success.
David Howard
AllC34Me
#6
Melting Slicks
In Covington, just north of New Orleans, good ride from you but to get a good deal, you are going to have to travel perhaps.
http://neworleans.craigslist.org/cto/4760555255.html
For the money you are talking, body work and paint will be needed but all is doable. But this forum is your friend.
Worth a call, key is good frame with minor lets say "managable" rust (is there such a thing, LOL's!). IMHO, stay away from "stored outside". If the frame is not bent, this might be a good project if you do the work yourself. If you got this one for 5 or 6, you could put 10 in it and hopefully be close to break even maybe.
Hope this helps and good luck with search. Half the fun is looking I say
http://neworleans.craigslist.org/cto/4760555255.html
For the money you are talking, body work and paint will be needed but all is doable. But this forum is your friend.
Worth a call, key is good frame with minor lets say "managable" rust (is there such a thing, LOL's!). IMHO, stay away from "stored outside". If the frame is not bent, this might be a good project if you do the work yourself. If you got this one for 5 or 6, you could put 10 in it and hopefully be close to break even maybe.
Hope this helps and good luck with search. Half the fun is looking I say
Last edited by 20mercury; 12-03-2014 at 10:55 AM.
#8
Safety Car
1968 corvette - $8000 (big lake)
1968 corvette **** - $4500 (henderson nv)
1968 Corvette Convertible - $5000
1968 Corvette Stingray: 10,000 OBO - $10000 (Vance)
No affiliation
This car came from Arizona with no rust problems. It appears that the suspension has been gone through also the rear was upgraded to a mono leaf. It has 4 new rebuilt calipers with stainless steel sleeves, also new gas tank with electric fuel pump and a new radiator. Also has new windshield, new dash pad, new sun visors, new rear window seal, new weather stripping for T tops.The body has custom hood and fender flares, the headlights have been moved to under the bumper, the rear cutouts have been glassed over, the interior has custom dash with new gages and a custom console.
This is a project car motor runs good and the car does yard drive[ needs pivot stud for clutch fork]
This is a project car motor runs good and the car does yard drive[ needs pivot stud for clutch fork]
1968 chevy corvette project car. completely rebuilt frame. clean title. no motor no tranny. 4500 obo (702)461-3436
68 Big Block Corvette Convertible, original matching number engine and transmission. 4 speed,
Needs complete restoration, partial burn
Have salvage title. Will trade for big block Chevy parts and Early Corvette Parts.
Early Corvette Parts for Sale Call with Needs
Needs complete restoration, partial burn
Have salvage title. Will trade for big block Chevy parts and Early Corvette Parts.
Early Corvette Parts for Sale Call with Needs
I have a 1968 Corvette Stingray project car it cranks up and runs but needs work. She's an older gal but has an all fiberglass body so she didn't lose her good looks over the years, just needs her make up painted up and a few scares needs to be medicated but she's still sexy. She's the loud one with the split bumper, pop out back glass and T-tops that hauls *** with a independent rear end. Has all original glass and transmission but the motor is not original. Good rubber all the way around but my baby she doesn't have an interior but she is solid. If your interested please give me a call after 5 pm or text before 5 pm and ask for Shane or Arron my number is 1(803) 614-2678. If you can't get an answer on this number call 803 308 7752
Needs brakes, gas tank, clutch, interior, little bit of body work and pop-up heads lights. Mechanically motor is good with some new parts but the carburetor needs adjusting and cleaning. Motor is a built 350 with the original 4 speed Hurst transmission. Can drive it just can't stop it! Clear title in hand! 1803 614-2678 or 803 308 7752. Open to trades : ex: land with Well and Septic. Other running cars, ready to go food truck and of course cash is king.
Needs brakes, gas tank, clutch, interior, little bit of body work and pop-up heads lights. Mechanically motor is good with some new parts but the carburetor needs adjusting and cleaning. Motor is a built 350 with the original 4 speed Hurst transmission. Can drive it just can't stop it! Clear title in hand! 1803 614-2678 or 803 308 7752. Open to trades : ex: land with Well and Septic. Other running cars, ready to go food truck and of course cash is king.
#9
68 project
I have a 68 327 auto coupe that seems to fit what you are looking for. Email me @ rogers.justinj@gmail.com if you want to see some pictures
Justin
Justin
looking for a good 1968 or 1969 veto project for my son and I
I am ok if car is not numbers matching or if it is a roller
i only need car to not be piece of shi# and have good title.
My son is 13 and really wants one of these cars
I am in iowa but will travel a ways or pay shipping
thanks aaron
I am ok if car is not numbers matching or if it is a roller
i only need car to not be piece of shi# and have good title.
My son is 13 and really wants one of these cars
I am in iowa but will travel a ways or pay shipping
thanks aaron
#10
Administrator
Member Since: Jul 2000
Location: About 1100 miles from where I call home. Blue lives matter.
Posts: 51,366
Received 5,321 Likes
on
2,770 Posts
You have 2 threads like this going, one says 68-69, the other says 68-72.
I will close the other one. One thread please.
https://www.corvetteforum.com/forums...post1589250764
I will close the other one. One thread please.
https://www.corvetteforum.com/forums...post1589250764
#11
1971 BB corvette convertible
I have a 71 convertible 454 auto. Originally War bonnet yellow in color. Car has been stripped and primed. Project started and never finished. Car has been stored inside for the last 25 yrs. Car is complete except for engine. No rust other than surface. Body great with no damage. BB hood. Title in my name. If your interested send me your email address and I can send you photos.