WTS - 1972 454 Project - South New Jersey
04-08-2016, 05:36 PM
#1
Pro
Thread Starter
WTS - 1972 454 Project - South New Jersey - some pictures added
I have a non matching numbers 454 72 corvette coupe that I am looking to sell. Engine ran perfect when I started taking it apart 2 years ago.
It is a project, and has the front clip removed(had a 78 front end on it), paint has began to be stripped, doors removed, interior removed.
Asking 11.5K OBO with all of the parts listed below(OR ASKING 4.5k for the car without all the extra parts, what's on the car now is what you get), will entertain all offers
Original 72 front end clip with inner fender wells completely restored.
Original L-88 hood - restored(minus air box) and ready for paint
New calipers and rotors
new brake lines
New Magnaflow dual exhaust
All new wiring harnesses
Tilt & Telescopic Steering Column
Dual Snorkel Air cleaner
New Driver Dash, New Center Console Dash, New Din style bezel, zip restored trailing arms installed on car, barely used tires all around.
Restored seats with black leather
New deluxe door panels
New top dash pad
New Radiator support
Lots of miscellaneous other new parts
I believe I have most if not all of the parts you'd need to finish putting the car together minus paint and bonding agents for the clip.
Additional Pictures available upon request. Again - it's a project.. However I've messed up my back and can't finish it.
Pictures don't show the seats which are redone, the front bumpers, I have a box of 3 sets of rear bumpers, the spare tire tub and lid, the remaining dash pieces and all of the other new parts that I've accumulated over the years to finish this.
It is a project, and has the front clip removed(had a 78 front end on it), paint has began to be stripped, doors removed, interior removed.
Asking 11.5K OBO with all of the parts listed below(OR ASKING 4.5k for the car without all the extra parts, what's on the car now is what you get), will entertain all offers
Original 72 front end clip with inner fender wells completely restored.
Original L-88 hood - restored(minus air box) and ready for paint
New calipers and rotors
new brake lines
New Magnaflow dual exhaust
All new wiring harnesses
Tilt & Telescopic Steering Column
Dual Snorkel Air cleaner
New Driver Dash, New Center Console Dash, New Din style bezel, zip restored trailing arms installed on car, barely used tires all around.
Restored seats with black leather
New deluxe door panels
New top dash pad
New Radiator support
Lots of miscellaneous other new parts
I believe I have most if not all of the parts you'd need to finish putting the car together minus paint and bonding agents for the clip.
Additional Pictures available upon request. Again - it's a project.. However I've messed up my back and can't finish it.
Pictures don't show the seats which are redone, the front bumpers, I have a box of 3 sets of rear bumpers, the spare tire tub and lid, the remaining dash pieces and all of the other new parts that I've accumulated over the years to finish this.
Last edited by 72C3Vette; 08-17-2016 at 08:33 PM.
04-09-2016, 10:33 PM
#3
Dementer sole survivor
Member Since: Oct 2015
Location: YUPPY HELL Westford MASS
Posts: 16,432
Received 6,278 Likes
on
3,915 Posts
2020 C3 of the Year Finalist - Modified
2020 Corvette of the Year Finalist (performance mods)
2019 C3 of Year Winner (performance mods)
2016 C3 of Year Finalist
Pics will help you too
04-10-2016, 10:53 AM
#5
Pro
Thread Starter
06-23-2016, 07:55 AM
#13
Senior Member
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
PM sent.
08-17-2016, 08:32 PM
#15
Pro
Thread Starter
TTT - Asking $4.5k for the car which includes everything on the frame in the pictures, engine, new shocks, new fiberglass leaf spring, doors, new calipers, new front and dash wiring harness....new brakes and a few other things... like tilt and telescopic steering column, rebuilt trailing arms from zip, new brake lines..... new exhaust... I'm sure I'm missing stuff...
does not include front clip, hood, or anything else not attached to the car
does not include front clip, hood, or anything else not attached to the car
Last edited by 72C3Vette; 08-17-2016 at 08:34 PM.
TTT
08-31-2016, 09:51 AM
#17
Pro
Thread Starter
Be a great car to finish especially with all the parts I'm including and the price point. I'd imagine would have one of the best looking corvettes when done for a great price.
However I am starting to part it out.....
So the Original L88 Hood will be going up for sale along with the ORiginal front end clip.
However I am starting to part it out.....
So the Original L88 Hood will be going up for sale along with the ORiginal front end clip.