Do you need an OptiSpark?
#1
Supporting Vendor
Thread Starter
Do you need an OptiSpark?
Restore spark to your LT1/LT4 motor with this BRAND NEW Distributor from AIP Electronics
This Distributor EXCEEDS OEM specification and comes 100% complete with everything needed including a new Optispark wiring harness.
(Note: Harness may not fit all applications and you may have to use your original harness.) Our AIP LT1 Optical Encoder is temp rated at 330°
and produces an accurate timing reference signal up to 8000 RPM, exceeding the OEM Mitsubishi encoder used in the AC Delco factory LT1 distributors.
This is most likely the best aftermarket LT1/LT4 distributor you will ever come across. Uses AIP's own Mitsubishi Specification Optical Encoder
for the most accurate/dependable LT1 Distributor yet.
We have negotiated with AIP and starting 12/01/2015 AIP Optisparks purchased through SacCityCorvette come with a 2 Year Replacement Warranty!
Must be purchased through SacCityCorvette to receive this 2 yr warranty!
Newly updated Vented $189.95
Non Vented $180.95
http://www.saccitycorvette.com/AIPOptiSpark.html
Here's whats new for the Vented Opti!
Revised Upper and Lower Rubber Gaskets with increased sealing surface
-Thread Lock Compound pre-applied to rotor and sensor mounting screws
-Coated EMI Shield
-Revised Laser Cut Shutter Disc for improved timing accuracy
-Revised Mitsubishi-Spec optical sensor
-Precision Japanese Ball Bearing
Photos of the new updated Vented AIP Optispark (cap colors vary)
NON VENTED OPTI
Attachment 48190879
Non Vented Sensor
Restore spark to your LT1/LT4 motor with this BRAND NEW Distributor from AIP Electronics
This Distributor EXCEEDS OEM specification and comes 100% complete with everything needed including a new Optispark wiring harness.
(Note: Harness may not fit all applications and you may have to use your original harness.) Our AIP LT1 Optical Encoder is temp rated at 330°
and produces an accurate timing reference signal up to 8000 RPM, exceeding the OEM Mitsubishi encoder used in the AC Delco factory LT1 distributors.
This is most likely the best aftermarket LT1/LT4 distributor you will ever come across. Uses AIP's own Mitsubishi Specification Optical Encoder
for the most accurate/dependable LT1 Distributor yet.
We have negotiated with AIP and starting 12/01/2015 AIP Optisparks purchased through SacCityCorvette come with a 2 Year Replacement Warranty!
Must be purchased through SacCityCorvette to receive this 2 yr warranty!
Vented $159.95
Non Vented $169.95
http://www.saccitycorvette.com/AIPOptiSpark.html
This Distributor EXCEEDS OEM specification and comes 100% complete with everything needed including a new Optispark wiring harness.
(Note: Harness may not fit all applications and you may have to use your original harness.) Our AIP LT1 Optical Encoder is temp rated at 330°
and produces an accurate timing reference signal up to 8000 RPM, exceeding the OEM Mitsubishi encoder used in the AC Delco factory LT1 distributors.
This is most likely the best aftermarket LT1/LT4 distributor you will ever come across. Uses AIP's own Mitsubishi Specification Optical Encoder
for the most accurate/dependable LT1 Distributor yet.
We have negotiated with AIP and starting 12/01/2015 AIP Optisparks purchased through SacCityCorvette come with a 2 Year Replacement Warranty!
Must be purchased through SacCityCorvette to receive this 2 yr warranty!
Newly updated Vented $189.95
Non Vented $180.95
http://www.saccitycorvette.com/AIPOptiSpark.html
Here's whats new for the Vented Opti!
Revised Upper and Lower Rubber Gaskets with increased sealing surface
-Thread Lock Compound pre-applied to rotor and sensor mounting screws
-Coated EMI Shield
-Revised Laser Cut Shutter Disc for improved timing accuracy
-Revised Mitsubishi-Spec optical sensor
-Precision Japanese Ball Bearing
Photos of the new updated Vented AIP Optispark (cap colors vary)
NON VENTED OPTI
Attachment 48190879
Non Vented Sensor
Restore spark to your LT1/LT4 motor with this BRAND NEW Distributor from AIP Electronics
This Distributor EXCEEDS OEM specification and comes 100% complete with everything needed including a new Optispark wiring harness.
(Note: Harness may not fit all applications and you may have to use your original harness.) Our AIP LT1 Optical Encoder is temp rated at 330°
and produces an accurate timing reference signal up to 8000 RPM, exceeding the OEM Mitsubishi encoder used in the AC Delco factory LT1 distributors.
This is most likely the best aftermarket LT1/LT4 distributor you will ever come across. Uses AIP's own Mitsubishi Specification Optical Encoder
for the most accurate/dependable LT1 Distributor yet.
We have negotiated with AIP and starting 12/01/2015 AIP Optisparks purchased through SacCityCorvette come with a 2 Year Replacement Warranty!
Must be purchased through SacCityCorvette to receive this 2 yr warranty!
Vented $159.95
Non Vented $169.95
http://www.saccitycorvette.com/AIPOptiSpark.html
__________________
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Last edited by SacCityCorvette; 11-10-2019 at 10:35 PM.
#2
Burning Brakes
This will probably be the first thing I buy from you if I end up picking up a C4 this weekend. Even though the one that is in it still works, it will be a matter of time before it goes out on me. Always nice to have a spare. These seem to be the best!
Which one would I need for a 94 C4?? You have 2 listed. Vented and non.
Which one would I need for a 94 C4?? You have 2 listed. Vented and non.
#3
Supporting Vendor
Thread Starter
Hi EVLGTO,
A 94 will probably have a non vented but you really need to check because some of the late 94's had vented. We can send which ever you need right out when your ready.
Thanks
Christian
A 94 will probably have a non vented but you really need to check because some of the late 94's had vented. We can send which ever you need right out when your ready.
Thanks
Christian
#4
#5
#7
Supporting Vendor
Thread Starter
We have negotiated with AIP and are happy to to announce that from now on Vented and Non-Vent AIP opti's purchased ONLY though SacCityCorvette now come with a 2 yr replacement warranty!
Thank you,
Christian
Thank you,
Christian
Last edited by SacCityCorvette; 12-01-2015 at 02:45 PM.
#8
I am so glad I saw your add. I have been looking at opti's all day after finding that mine is more than likely going bad. I was very discouraged with all the differences in prices from $500+ to $85. I usually I'm very frightened by low prices but with the 2 year warranty that relieves some worry. I have a 93 40th by the way. Hope this works!! Thanks.
#9
Supporting Vendor
Thread Starter
I am so glad I saw your add. I have been looking at opti's all day after finding that mine is more than likely going bad. I was very discouraged with all the differences in prices from $500+ to $85. I usually I'm very frightened by low prices but with the 2 year warranty that relieves some worry. I have a 93 40th by the way. Hope this works!! Thanks.
Thank you.
#11
Supporting Vendor
Thread Starter
#12
Melting Slicks
I have 200 miles on it-so far all is good!! I have added a vented MSD Cap/Rotor.
Regards,
Steve
#13
Supporting Vendor
Thread Starter
Thanks Steven for clearing that up. I remembered the sensor was good quantity. For some reason I thought he said it was US made.
Christian
Christian
#17
Supporting Vendor
Thread Starter
Yes Sir, it is ready to bolt on.
Thank you for your business!
Christian
Thank you for your business!
Christian
#20
Race Director
AS for the cap./...YES...I have seen them be black/dark gray instead of the light tan color. That is not big deal breaker for me.
DUB