Console wrap of a different color
#1
Le Mans Master
Thread Starter
Console wrap of a different color
Decided to wrap the console, pretty beat up. After checking out 2 million vids and posts I got some Dinoc carbon fiber, but then saw a new 3M color..black brushed metal, so I got some of that too. This took ALL day and some of last night. Getting the Dulso off sux but as soon as I tried nail polish remover (no acetone) it came off pretty easy. I sanded it down smooth and washed it all with denatured alcohol. Some things I learned: you need a good heat gun, mine has a stand, can't see a way to do it with just a hair dryer. This takes a long time, about 10 hours total for the console and radio bezel, but I did a little extra as the pics will show. I have no idea how well this will hold up. The Dinoc is much thicker than the brushed scotch print, so it is easier to work with. Some pics:
what Dulso looks like as it dies...
Starting the wrap
This wasn't as hard as the console, took half the time
figured I would use some of the Dinoc, came out ok, a little different..
Also under the door..
kinda like it..
finished with a new shifter boot, also got a new ****..
what Dulso looks like as it dies...
Starting the wrap
This wasn't as hard as the console, took half the time
figured I would use some of the Dinoc, came out ok, a little different..
Also under the door..
kinda like it..
finished with a new shifter boot, also got a new ****..
Last edited by mfi; 06-04-2012 at 06:31 PM.
#5
Le Mans Master
Thread Starter
starting on the driver door window/mirror switch bezel and door pull..back is killing me..need some Aleve..
Aleve..not working..this one was hard..the door pull is murder..
Aleve..not working..this one was hard..the door pull is murder..
Last edited by mfi; 06-04-2012 at 10:36 PM.
#10
Le Mans Master
Thread Starter
got the brushed from Auto vinyl solutions..Put it all in today..wow what a difference..not as in your face as the carbon which is what I wanted..but I took some other pieces out and did tem with the carbon...just because..pics when the sun comes out...going t wrap my jeeps faceplate with the carbon..big piece..should be fun..getting better at it..starting to remember my upholstry days doing all kind of furniture! Same idea..I,ll post some tips I'm learning...
#13
Le Mans Master
Thread Starter
Now this is getting insane..decided to give the jeep some sprucing..2 days on this and still not done!..
This side piece just took 3 hours, tried to do it all in one piece, impossible..learning a lot about this..now I know why they charge so much.
This side piece just took 3 hours, tried to do it all in one piece, impossible..learning a lot about this..now I know why they charge so much.
Last edited by mfi; 06-06-2012 at 11:18 PM.
#18
Le Mans Master
Thread Starter
Holy crap, just watched a bunch of vids on how to skin parts with real carbon fiber...have to try this..my Gf is going to kill me, I'm using the dining room table...have to get the stuff from England unless I can find a source here...