New here. Figured I would say hello to my fellow C4 owners.
#1
Instructor
Thread Starter
New here. Figured I would say hello to my fellow C4 owners.
Hey all. I posted in the "new members" area but quickly noticed that it was just a place for people to get their post count up and not meant for actual introductions at all. So I will do it all over again, here.
I am a 25 year old master auto mechanic, and I own an '84. Nothing near stock, I actually never saw this car stock. Previous owner(s) had carb swapped the car and had done a really poor job of it. Using old used parts and hacking everything together. I decided the car needed my help, so I rescued her from her owner for a very reasonable amount and took her home.
After recently "investing" quite bit of cash in it I've almost got it where I want it performance wise. The engine is still carb swapped, but everything is nice new edelbrock aluminum. High compression street heads, air-gap high rise intake manifold, 650cfm carb, 1.6 roller rockers, hedman headers and a full custom exhaust. Oh, and it has newer forged flat top pistons in it, that one of the previous owners must have put in at some point (I can still see hone marks on the cyl walls). As it sits now its at roughly 10.5:1 compression ratio and has yet to be dino tuned/measured.
Some of you may have been wondering, with the above mention of a high rise intake manifold, how I managed to fit it under the clam shell? I didn't, there is a hole cut in it, with a hilborn scoop that sticks through it. Now, before anyone screams blaspheme, my 'vette is not anywhere near low mileage (on the body) and it was not in stock condition when I bought it.
Haven't done much exterior wise. It needs a paint job, but not terribly. I mostly just want a color change. Red C4 Corvettes are too common for my taste. Oh, I did however buy a set of '96 GrandSport wheels for it, and wrapped them in some good rubber for fun times at the track this summer.
Anyways, on with the two old pictures I have of her. I will grab more within the next few days and post them in this thread when I do.
I really, really don't like these wheels. So glad they are off the car.
Old engine picture. This was after installing the high rise manifold and carb. Still old heads, a lot of previous owner hacked stuff still there in this picture.
I am a 25 year old master auto mechanic, and I own an '84. Nothing near stock, I actually never saw this car stock. Previous owner(s) had carb swapped the car and had done a really poor job of it. Using old used parts and hacking everything together. I decided the car needed my help, so I rescued her from her owner for a very reasonable amount and took her home.
After recently "investing" quite bit of cash in it I've almost got it where I want it performance wise. The engine is still carb swapped, but everything is nice new edelbrock aluminum. High compression street heads, air-gap high rise intake manifold, 650cfm carb, 1.6 roller rockers, hedman headers and a full custom exhaust. Oh, and it has newer forged flat top pistons in it, that one of the previous owners must have put in at some point (I can still see hone marks on the cyl walls). As it sits now its at roughly 10.5:1 compression ratio and has yet to be dino tuned/measured.
Some of you may have been wondering, with the above mention of a high rise intake manifold, how I managed to fit it under the clam shell? I didn't, there is a hole cut in it, with a hilborn scoop that sticks through it. Now, before anyone screams blaspheme, my 'vette is not anywhere near low mileage (on the body) and it was not in stock condition when I bought it.
Haven't done much exterior wise. It needs a paint job, but not terribly. I mostly just want a color change. Red C4 Corvettes are too common for my taste. Oh, I did however buy a set of '96 GrandSport wheels for it, and wrapped them in some good rubber for fun times at the track this summer.
Anyways, on with the two old pictures I have of her. I will grab more within the next few days and post them in this thread when I do.
I really, really don't like these wheels. So glad they are off the car.
Old engine picture. This was after installing the high rise manifold and carb. Still old heads, a lot of previous owner hacked stuff still there in this picture.
#2
Burning Brakes
Well,welcome to the forum! And have fun with your corvette..I'm thinking it will lead to other things down the road,but at least you started out with the right body style
#6
Race Director
Welcome! If you are ever interested in making a change to your hood then check out this site:
http://www.toledopro.com/vette-hoods.html
http://www.toledopro.com/vette-hoods.html
#10
Melting Slicks
Welcome to the forum! Looks like you more than know your way around any automobile...so let me be the first to say it...to have another Master Mechanic around here is always a welcomed thing Keep us updated on the progress and as always post lots of pics...we like pics
astepup said that
astepup said that
#11
Instructor
Hey all. I posted in the "new members" area but quickly noticed that it was just a place for people to get their post count up and not meant for actual introductions at all. So I will do it all over again, here.
I am a 25 year old master auto mechanic, and I own an '84. Nothing near stock, I actually never saw this car stock. Previous owner(s) had carb swapped the car and had done a really poor job of it. Using old used parts and hacking everything together. I decided the car needed my help, so I rescued her from her owner for a very reasonable amount and took her home.
After recently "investing" quite bit of cash in it I've almost got it where I want it performance wise. The engine is still carb swapped, but everything is nice new edelbrock aluminum. High compression street heads, air-gap high rise intake manifold, 650cfm carb, 1.6 roller rockers, hedman headers and a full custom exhaust. Oh, and it has newer forged flat top pistons in it, that one of the previous owners must have put in at some point (I can still see hone marks on the cyl walls). As it sits now its at roughly 10.5:1 compression ratio and has yet to be dino tuned/measured.
Some of you may have been wondering, with the above mention of a high rise intake manifold, how I managed to fit it under the clam shell? I didn't, there is a hole cut in it, with a hilborn scoop that sticks through it. Now, before anyone screams blaspheme, my 'vette is not anywhere near low mileage (on the body) and it was not in stock condition when I bought it.
Haven't done much exterior wise. It needs a paint job, but not terribly. I mostly just want a color change. Red C4 Corvettes are too common for my taste. Oh, I did however buy a set of '96 GrandSport wheels for it, and wrapped them in some good rubber for fun times at the track this summer.
Anyways, on with the two old pictures I have of her. I will grab more within the next few days and post them in this thread when I do.
I really, really don't like these wheels. So glad they are off the car.
Old engine picture. This was after installing the high rise manifold and carb. Still old heads, a lot of previous owner hacked stuff still there in this picture.
I am a 25 year old master auto mechanic, and I own an '84. Nothing near stock, I actually never saw this car stock. Previous owner(s) had carb swapped the car and had done a really poor job of it. Using old used parts and hacking everything together. I decided the car needed my help, so I rescued her from her owner for a very reasonable amount and took her home.
After recently "investing" quite bit of cash in it I've almost got it where I want it performance wise. The engine is still carb swapped, but everything is nice new edelbrock aluminum. High compression street heads, air-gap high rise intake manifold, 650cfm carb, 1.6 roller rockers, hedman headers and a full custom exhaust. Oh, and it has newer forged flat top pistons in it, that one of the previous owners must have put in at some point (I can still see hone marks on the cyl walls). As it sits now its at roughly 10.5:1 compression ratio and has yet to be dino tuned/measured.
Some of you may have been wondering, with the above mention of a high rise intake manifold, how I managed to fit it under the clam shell? I didn't, there is a hole cut in it, with a hilborn scoop that sticks through it. Now, before anyone screams blaspheme, my 'vette is not anywhere near low mileage (on the body) and it was not in stock condition when I bought it.
Haven't done much exterior wise. It needs a paint job, but not terribly. I mostly just want a color change. Red C4 Corvettes are too common for my taste. Oh, I did however buy a set of '96 GrandSport wheels for it, and wrapped them in some good rubber for fun times at the track this summer.
Anyways, on with the two old pictures I have of her. I will grab more within the next few days and post them in this thread when I do.
I really, really don't like these wheels. So glad they are off the car.
Old engine picture. This was after installing the high rise manifold and carb. Still old heads, a lot of previous owner hacked stuff still there in this picture.