Pics of my new A.H. rear spoiler
#6
Banned Loser
Member Since: Aug 2009
Location: They say you learn from your mistakes, I must be a genius
Posts: 52,808
Received 248 Likes
on
114 Posts
2017 Corvette of the Year
2016 C4 of Year Finalist
Creator of the "Original" whining and crying thread
St. Jude Donor '14-'15-'16-'17
Looks great! Beautiful C4 too!!
#12
Racer
Thread Starter
#13
Team Owner
#14
Team Owner
Member Since: Sep 2003
Location: Freedom is never more than one generation away from extinction.
Posts: 20,161
Received 640 Likes
on
444 Posts
St. Jude '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-‘19-'20-'21-'22-'23-'24
I believe the price is something in the area of 450 bucks now.
No telling how expensive the chin spoiler might cost.
No telling how expensive the chin spoiler might cost.
#15
Le Mans Master
I had a feeling that it would be more than what most were willing to pay. Several Spoiler threads have come around and most people were only willing to pay about half as much.
#16
Le Mans Master
Guys American Hydrocarbon is coming out with some nice stuff.
As far as I know they are doing CF/fiberglass hoods, tops, chin spoilers and this wing.
As far as I know they are doing CF/fiberglass hoods, tops, chin spoilers and this wing.
#17
Life Starts at 120 mph
Member Since: Jun 2012
Location: Upstate New York
Posts: 1,535
Received 185 Likes
on
118 Posts
NCM Lifetime Member
NCM Sinkhole Donor
Boxcar 2cents
SoAlVette,
I think it looks just as we intended, clean, simple and subtle. I think it is a great addition to your ride that truly slides now. Looks like its cutting the wind sitting still.
Question, can you speak on workmanship and quality aspect. I think the reader's may want to hear how well it is or is not made. You were no part of this little project like Polo92 and myself.
Thanks
Boxcar
I think it looks just as we intended, clean, simple and subtle. I think it is a great addition to your ride that truly slides now. Looks like its cutting the wind sitting still.
Question, can you speak on workmanship and quality aspect. I think the reader's may want to hear how well it is or is not made. You were no part of this little project like Polo92 and myself.
Thanks
Boxcar
#18
Racer
Thread Starter
SoAlVette,
I think it looks just as we intended, clean, simple and subtle. I think it is a great addition to your ride that truly slides now. Looks like its cutting the wind sitting still.
Question, can you speak on workmanship and quality aspect. I think the reader's may want to hear how well it is or is not made. You were no part of this little project like Polo92 and myself.
Thanks
Boxcar
I think it looks just as we intended, clean, simple and subtle. I think it is a great addition to your ride that truly slides now. Looks like its cutting the wind sitting still.
Question, can you speak on workmanship and quality aspect. I think the reader's may want to hear how well it is or is not made. You were no part of this little project like Polo92 and myself.
Thanks
Boxcar
First let me start by saying thanks to Polo92, Boxcar and Pat at AH for working together to produce such a great spoiler. It turned out exactly as I had hoped. Really quality product, and worth the wait.
As with any mod, there is always a little tweaking involved. We are talking about mounting a very rigid piece of fiberglass the width of our car onto a thin walled piece of molded rubber. If it were being mounting on fiberglass or onto a metal body you could expect them all to fit exactly the same. Depending on the conditions of your bumper, how long you car has sat in the sun, the mounting of the rubber bumper to the body, and a number of other factors that could be involved, the fit and finish can vary.
In my case, the double sided tape just does not give it the fit that I would prefer. I tend to be kind of **** when it comes to my car. In my case I think I am going to hard mount mine, once I decide exactly the best way to do so. The tape works fine, but if you have dips or waves in your bumper, it is going to make a difference. No fault of the spoiler at all.
Again, thanks to all involved in this project. I really appreciate the work involved in producing this spoiler. Anyone thinking of purchasing one of these should go ahead and do so, you will not be disappointed.
Last edited by SoAlVette; 10-07-2013 at 03:24 PM.
#19
Team Owner
Member Since: Sep 2003
Location: Freedom is never more than one generation away from extinction.
Posts: 20,161
Received 640 Likes
on
444 Posts
St. Jude '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-‘19-'20-'21-'22-'23-'24
Just curious. Wheres the spoiler for the early C4?
Ya know, the one that didn't need to be re-engineered??
Just make a mold and pop 'em out?
Frankly Boxcar this project has been a real disappoint for many here.
Starting with pricing expectations and followed with delayed deliveries.
Sorry dude, you need to know that a lot of us feel screwed on this project.
There I said it. And maybe others will chime in and maybe not.
Ya know, the one that didn't need to be re-engineered??
Just make a mold and pop 'em out?
Frankly Boxcar this project has been a real disappoint for many here.
Starting with pricing expectations and followed with delayed deliveries.
Sorry dude, you need to know that a lot of us feel screwed on this project.
There I said it. And maybe others will chime in and maybe not.
Last edited by JrRifleCoach; 10-07-2013 at 02:58 PM.
#20
Life Starts at 120 mph
Member Since: Jun 2012
Location: Upstate New York
Posts: 1,535
Received 185 Likes
on
118 Posts
NCM Lifetime Member
NCM Sinkhole Donor
Just curious. Wheres the spoiler for the early C4?
Ya know, the one that didn't need to be re-engineered??
Just make a mold and pop 'em out?
Frankly Boxcar this project has been a real disappoint for many here.
Starting with pricing expectations and followed with delayed deliveries.
Sorry dude, you need to know that a lot of us feel screwed on this project.
There I said it. And maybe others will chime in and maybe not.
Ya know, the one that didn't need to be re-engineered??
Just make a mold and pop 'em out?
Frankly Boxcar this project has been a real disappoint for many here.
Starting with pricing expectations and followed with delayed deliveries.
Sorry dude, you need to know that a lot of us feel screwed on this project.
There I said it. And maybe others will chime in and maybe not.
As for the pricing Sir, and again as stated in the beginning, "pricing is completely up to Hydor or A.H. Neither Polo92 or myself stand to earn one dime so it makes no difference to me how many A.H. sells. If there were anything I could do about pricing I would. I'm sure A.H. I reading the posts and is hearing the concerns and disappointments of potential costumers, but that is his business decision.
I do feel that Polo92 and I met our end of the obligation that was communicated in the thread "Attention C4 Spoiler Buyers" according to SoAlVette review.
Thanks Again for honest feedback.
Boxcar