Let's see some 1994+ C4 cars with 17x9.5 & 17x11 GS wheel pics
#1
Burning Brakes
Thread Starter
Let's see some 1994+ C4 cars with 17x9.5 & 17x11 GS wheel pics
My tires are toast on my sawblades, so I'm more than likely pulling the trigger on a set of these replica GS wheels from Florida Speed Shop tomorrow. Got quoted $1350 shipped. For an extra $50, they will throw in matching black lug nuts and C4 emblem center caps. That includes new Sumitomo tires 275/40 fronts and 315/35 rears. Some people are telling me to go Sumitomo route because other brands like Nitto are wider and will stick out the rear more. I prefer Nitto 555's. Another place quoted me $10 more with the Nittos.
Let's see some 94+ cars with the same set up
Let's see some 94+ cars with the same set up
#2
Burning Brakes
93 with GS wheels
here you go - not a 94, but close
These are the sizes you're looking at. The 11s stick out a little.
Good luck!
These are the sizes you're looking at. The 11s stick out a little.
Good luck!
#6
What/where/how-much is that device holding your hatch open a little with? And how well does it work. I am interested because I dislike running my A/C. Probably my parents fault and the wind is much more pleasurable anyhow.
#7
Amazing what a google search will give you, I should've looked before asking. I found this, is it similar to yours?
http://www.mamotorworks.com/Corvette...-vent-600298-1
Sorry OP, I don't mean to thread-jack you. Kimmer if you don't mind PM'ing me so this gentleman can have his thread back, it would be much appreciated. Thank you.
http://www.mamotorworks.com/Corvette...-vent-600298-1
Sorry OP, I don't mean to thread-jack you. Kimmer if you don't mind PM'ing me so this gentleman can have his thread back, it would be much appreciated. Thank you.
#8
Melting Slicks
#12
Burning Brakes
93 with GS wheels- Polo vert
Thanks! Not an LT4, though. This is a nice thread. Those A-Mold wheels look good in Chrome, Silver and Black! Lots of very nice cars in this thread.
(Thanks for the compliment, too, to 1993C4LT1!)
Correct me if I'm wrong, but these are the only wheels that you'll occasionally see (because of their lightness) on C5s.
(Thanks for the compliment, too, to 1993C4LT1!)
Correct me if I'm wrong, but these are the only wheels that you'll occasionally see (because of their lightness) on C5s.
Last edited by helphos; 07-28-2015 at 08:17 AM. Reason: spelling!
#14
Let's see some 1994+ C4 cars with 17x9.5 & 17x11 GS wheel pics
94 with 315 Goodyear's on rear, flares keep them from sticking out a little. Wheels are 17x11 rear and 17x9.5 in front
Last edited by blue94; 07-28-2015 at 05:26 PM.
#15
Burning Brakes
Thread Starter
Just ordered me some polished A Molds from OE Wheels. Got a smokin' deal with Nitto 555's. After looking at both the Admiral blue vettes in this thread, I was sold!!!
Now what did you guys do for centercaps? Can I use the ones off my chrome sawblades? Because the centercaps included in the new set are blanks.
Now what did you guys do for centercaps? Can I use the ones off my chrome sawblades? Because the centercaps included in the new set are blanks.
#16
Race Director
Member Since: Feb 2002
Location: Compound in the Grove, Ga.
Posts: 11,328
Received 910 Likes
on
583 Posts
2020 C3 of the Year Finalist - Unmodified
2019 C4 of Year Finalist (performance mods)
2018 C4 of Year Finalist
2015 C4 of the Year Finalist
St. Jude Donor '16
2020 C3 of the Year Finalist - Unmodified
#18
Burning Brakes
Thread Starter
Let's see some 1994+ C4 cars with 17x9.5 & 17x11 GS wheel pics
Damn that looks sick!!!!!
Mine currently looks like this.
Well except for the drop. I had it lifted back to stock. Prior owner had it completely slammed, the wrong way.
Mine currently looks like this.
Well except for the drop. I had it lifted back to stock. Prior owner had it completely slammed, the wrong way.
#19
Instructor
Member Since: May 2012
Location: Waxhaw NC
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
#20
Let's see some 1994+ C4 cars with 17x9.5 & 17x11 GS wheel pics
Just ordered me some polished A Molds from OE Wheels. Got a smokin' deal with Nitto 555's. After looking at both the Admiral blue vettes in this thread, I was sold!!!
Now what did you guys do for centercaps? Can I use the ones off my chrome sawblades? Because the centercaps included in the new set are blanks.
Now what did you guys do for centercaps? Can I use the ones off my chrome sawblades? Because the centercaps included in the new set are blanks.