Notices
C4 General Discussion General C4 Corvette Discussion not covered in Tech

Broken hatch release switch

Thread Tools
 
Search this Thread
 
Old 12-09-2016, 12:28 PM
  #1  
rorrapalooza
Advanced
Thread Starter
 
rorrapalooza's Avatar
 
Member Since: Oct 2016
Location: Norfolk Virginia
Posts: 69
Received 9 Likes on 3 Posts
Default Broken hatch release switch

Im in the middle of taking the passenger side door apart to replace some trim and the power window ribbon, and i was wondering if there was any way to fix the hatch release switch while im in there

looks like a replacement switch for an early c4 runs about $50, a bit too much for me. The driver side and center console switches work fine
Old 12-09-2016, 01:05 PM
  #2  
antfarmer2
Race Director
 
antfarmer2's Avatar
 
Member Since: Mar 2015
Posts: 15,926
Received 578 Likes on 555 Posts
Default

Try vette2vette mine does not have a passenger side switch and is just fine.

Last edited by antfarmer2; 12-09-2016 at 01:06 PM.
Old 12-09-2016, 03:06 PM
  #3  
JimLentz
Melting Slicks
Support Corvetteforum!
 
JimLentz's Avatar
 
Member Since: Jan 2014
Location: Downers Grove Illinois
Posts: 2,474
Received 250 Likes on 239 Posts

Default

Originally Posted by rorrapalooza
Im in the middle of taking the passenger side door apart to replace some trim and the power window ribbon, and i was wondering if there was any way to fix the hatch release switch while im in there

looks like a replacement switch for an early c4 runs about $50, a bit too much for me. The driver side and center console switches work fine
What is wrong with the switch, does it not make contact when you push it down? My passenger hatch release switch didn't work, but it was from a bad door ajar switch. At least on my '92 they are in series.
Old 12-09-2016, 04:23 PM
  #4  
rorrapalooza
Advanced
Thread Starter
 
rorrapalooza's Avatar
 
Member Since: Oct 2016
Location: Norfolk Virginia
Posts: 69
Received 9 Likes on 3 Posts
Default

Originally Posted by JimLentz
What is wrong with the switch, does it not make contact when you push it down? My passenger hatch release switch didn't work, but it was from a bad door ajar switch. At least on my '92 they are in series.
Its on an 84. The switch seems to work mechanically, it clicks down, and all the wiring looks okay. could it be as simple as spraying on some contact cleaner?

just verified both door ajar switches operate correctly; when released the dash security light comes on, when depressed it goes away.
Old 12-09-2016, 04:29 PM
  #5  
FresnoVette
Instructor
 
FresnoVette's Avatar
 
Member Since: Mar 2016
Posts: 105
Received 10 Likes on 9 Posts
St. Jude Donor '17
Default

FYI I've seldom if ever used that pass door switch.
That is why the later models did not include that feature.
Old 12-11-2016, 07:14 PM
  #6  
rorrapalooza
Advanced
Thread Starter
 
rorrapalooza's Avatar
 
Member Since: Oct 2016
Location: Norfolk Virginia
Posts: 69
Received 9 Likes on 3 Posts
Default

A little contact cleaner on the connection and the switch cleared it right up after a few cycles
Old 12-11-2016, 07:42 PM
  #7  
JimLentz
Melting Slicks
Support Corvetteforum!
 
JimLentz's Avatar
 
Member Since: Jan 2014
Location: Downers Grove Illinois
Posts: 2,474
Received 250 Likes on 239 Posts

Default

Originally Posted by rorrapalooza
A little contact cleaner on the connection and the switch cleared it right up after a few cycles

Get notified of new replies

To Broken hatch release switch




Quick Reply: Broken hatch release switch



All times are GMT -4. The time now is 10:56 AM.