ATI Procharger Intercooled Supercharger for L98
02-05-2005, 08:04 PM
#1
Melting Slicks
Thread Starter
ATI Procharger Intercooled Supercharger for L98
GEEEEZ, member could not get funds to me so here it is again. I am dropping the price to $2300 plus shipping. This is a hell of a deal folks!!
Here it is:
It's about a 5 year old kit that was only used about 900 miles by the original owner (forum member) then boxed. I never installed it and now my direction is changing. It includes everything including installation manual (kinda lame), parts list. The kit is complete with all bolts, brackets, hoses, etc.. etc..
Even comes with an extra power steering bracket pre-modified so you don't have to cut your original. I will even throw in an unused pillar mounted boost gauge! My mechanic looked at my boxes full of parts and deemed it complete. The only damage is to one of the chrome tubes that comes up from the intercooler to the TB. It was slightly modified (bent) on the underside to clear what looks to be the crossmember. You cannot see it when mounted but you can still get a new one for $35 (I called). Here are a few pics.
Here it is:
It's about a 5 year old kit that was only used about 900 miles by the original owner (forum member) then boxed. I never installed it and now my direction is changing. It includes everything including installation manual (kinda lame), parts list. The kit is complete with all bolts, brackets, hoses, etc.. etc..
Even comes with an extra power steering bracket pre-modified so you don't have to cut your original. I will even throw in an unused pillar mounted boost gauge! My mechanic looked at my boxes full of parts and deemed it complete. The only damage is to one of the chrome tubes that comes up from the intercooler to the TB. It was slightly modified (bent) on the underside to clear what looks to be the crossmember. You cannot see it when mounted but you can still get a new one for $35 (I called). Here are a few pics.
Last edited by jerkyboy; 02-09-2005 at 11:53 AM. Reason: relist
02-06-2005, 10:42 AM
#3
Safety Car
Member Since: Dec 2004
Location: Poop land
Posts: 4,088
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jerkyboy
Unfortunately, that last member couldn't come up with the funds so I must put this kit up for sale again. Need cashola for the 434 
Here it is:
It's about a 5 year old kit that was only used about 900 miles by the original owner (forum member) then boxed. I never installed it and now my direction is changing. It includes everything including installation manual (kinda lame), parts list. The kit is complete with all bolts, brackets, hoses, etc.. etc..
Even comes with an extra power steering bracket pre-modified so you don't have to cut your original. I will even throw in an unused pillar mounted boost gauge! My mechanic looked at my boxes full of parts and deemed it complete. The only damage is to one of the chrome tubes that comes up from the intercooler to the TB. It was slightly modified (bent) on the underside to clear what looks to be the crossmember. You cannot see it when mounted but you can still get a new one for $35 (I called). Here are a few pics. I am asking $2500 plus shipping.
Here it is:
It's about a 5 year old kit that was only used about 900 miles by the original owner (forum member) then boxed. I never installed it and now my direction is changing. It includes everything including installation manual (kinda lame), parts list. The kit is complete with all bolts, brackets, hoses, etc.. etc..
Even comes with an extra power steering bracket pre-modified so you don't have to cut your original. I will even throw in an unused pillar mounted boost gauge! My mechanic looked at my boxes full of parts and deemed it complete. The only damage is to one of the chrome tubes that comes up from the intercooler to the TB. It was slightly modified (bent) on the underside to clear what looks to be the crossmember. You cannot see it when mounted but you can still get a new one for $35 (I called). Here are a few pics. I am asking $2500 plus shipping.
So how much boost does it push? What is the gain in a stock L98? Bump... I'm kinda interested.
02-06-2005, 03:02 PM
#7
Melting Slicks
Thread Starter
xeugep..why do those bills say "monopoly" on them 
just kidding.
The pulley in my kit is an 6-8psi pulley. The kit comes with an inline "booster" fuel pump. I already have a walbro unit in my tank so I wasn't going to use it. I have heard some complaints about the inline units.
As far a bump in hp, it all depends on what you've got for mods and condition of your engine. The literature talks about walking a stock ZR-1 in the 1/4. I imagine you would be close to 400chp on a healthy stock L98. You can post over in the FI section. There are a few running this kit.
I bought the kit over a year ago and came close to installing it until I found that my rings in my new 383 never seated. I got a good deal on this and am just trying to recoup most of the $. I'd really like a couple more Jeffersons as I was considering posting ebay tomorrow. PM me if you are truly interested.
Here is a close up of the parts list. This one's the intercooled kit:
just kidding. The pulley in my kit is an 6-8psi pulley. The kit comes with an inline "booster" fuel pump. I already have a walbro unit in my tank so I wasn't going to use it. I have heard some complaints about the inline units.
As far a bump in hp, it all depends on what you've got for mods and condition of your engine. The literature talks about walking a stock ZR-1 in the 1/4. I imagine you would be close to 400chp on a healthy stock L98. You can post over in the FI section. There are a few running this kit.
I bought the kit over a year ago and came close to installing it until I found that my rings in my new 383 never seated. I got a good deal on this and am just trying to recoup most of the $. I'd really like a couple more Jeffersons as I was considering posting ebay tomorrow. PM me if you are truly interested.
Here is a close up of the parts list. This one's the intercooled kit:
02-06-2005, 07:30 PM
#9
Melting Slicks
Member Since: Nov 2004
Location: Belews Creek north carolina
Posts: 2,348
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '05
i wouldnt waste my time with that on ebay 
just dont think it would do good on there i think you would do better here but i may be wrong 
just dont think it would do good on there i think you would do better here but i may be wrong
Last edited by myvettesblue; 02-06-2005 at 07:37 PM.
02-06-2005, 08:35 PM
#10
Le Mans Master
Man if it just wasn't tax time, I would buy it for sure... 
I have really been thinking of one of these lately. That would be perfect for my engine and a 10sec time slip. 
I have really been thinking of one of these lately. That would be perfect for my engine and a 10sec time slip.
02-06-2005, 10:44 PM
#11
Florida turtle advocate
Originally Posted by SurfnSun
Pssst Benjamins are $100's
Hey ,at least it's a bump
02-06-2005, 11:39 PM
#12
Safety Car
Member Since: Dec 2004
Location: Poop land
Posts: 4,088
Likes: 0
Received 0 Likes
on
0 Posts
Man, I totally need this S/C kit. After I spend this $2000, I'll be bum-broke like a worn shoe for about another 4 weeks. Dunno where I can get another 5 large...
Dunno where I can get another 5 large...
Someone will be a lucky person indeed...
02-07-2005, 09:09 PM
#16
Safety Car
Originally Posted by chriswtx
Man if it just wasn't tax time, I would buy it for sure... I have really been thinking of one of these lately. That would be perfect for my engine and a 10sec time slip.
I have really been thinking of one of these lately. That would be perfect for my engine and a 10sec time slip. Let me know when you are ready. I have the same kit, but with many mods (FMU, bracket, tubing, etc) that solidify what ATI began. I started way back with an ATI kit identical to what was shown (different SN), modified the bracket (considerably more belt wrap), replaced the booster pump (Walbro twins at the time), changed the IC (Spearco unit), upgraded the blow-off valve (Vortech unit), did away with the FMU (changed to FAST programming), changed the head unit (more flow), then began the upgrade of the piping (to 3" piping).
Since that time, I have again upgraded the fuel system, changed the head unit again, and replaced the blow-off.
What I wound up with is a complete ATI 10-12 psi kit.
Additionally, you live in TX, as do I, so it is easy to preview the parts prior to purchase.
Aaron
