*Parts for sale (more)
#1
Melting Slicks
Thread Starter
Member Since: Jan 2004
Location: walkersville md
Posts: 2,979
Likes: 0
Received 0 Likes
on
0 Posts
*Parts for sale (more)
SRP custom alumn pistons Forged, 350 .030 brand new in box, with rings
-24cc dish.
for 6" rod with standard stroke(3.48)
Full floating pins
500$
NEW Eagle Forged 3.48" stroke crank. 1 pc rear main seal. New in box. 450$.
New OE style comp cams roller lifters. PN- CCA-850-16 160$
Comp cams Solid roller cam. Cam is "NEW" never used, never turned, never had a timing chain, or lifters or any pressure on lobes, but has been placed in a block, and has assembly lube on it. but it is still brand new.
570/576 lift 242/248 dur. @.050
110 LSA on 106 Centerline.
grind - CS XR280 R-10
220$ plus shipping.
Cam Style: Mechanical roller tappet
Basic Operating RPM Range: 2,500-6,500 RPM
Intake Duration at 050 inch Lift: 242
Exhaust Duration at 050 inch Lift: 248
Duration at 050 inch Lift: 242 int./248 exh.
Advertised Intake Duration: 280
Advertised Exhaust Duration: 286
Advertised Duration: 280 int./286 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.570 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.576 in.
Valve Lift with Factory Rocker Arm Ratio: 0.570 int./0.576 exh. lift
Lobe Separation (degrees): 110
Intake Valve Lash: 0.016 in.
Exhaust Valve Lash: 0.018 in.
Computer Controlled Compatible: No
Grind Number: CS XR280 R-10
Comp cams 305 hyd roller cam- for turbos/SC 08-305-8 -220$
Cam Style: Hydraulic roller tappet
Basic Operating RPM Range: 1,800-5,800 RPM
Intake Duration at 050 inch Lift: 220
Exhaust Duration at 050 inch Lift: 230
Duration at 050 inch Lift: 220 int./230 exh.
Advertised Intake Duration: 276
Advertised Exhaust Duration: 290
Advertised Duration: 276 int./290 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.510 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.510 in.
Valve Lift with Factory Rocker Arm Ratio: 0.510 int./0.510 exh. lift
Lobe Separation (degrees): 114
Intake Valve Lash: 0.000 in.
Exhaust Valve Lash: 0.000 in.
350 4 bolt block. 72 block year. .060 over. fully machined ready to go, line honed, bored and honed with torque plate. new brass freeze plugs. decked .010 550$ OBO. I paid 650$ for mchine work plus block.
Email for pics. everything is brand new , never used.
USED parts-
D36 Batwing 150 OBO.
A/c / Heater box cover with blower motor and evaporator - 75$ OBO
Hippiehead025@adelphia.net
-24cc dish.
for 6" rod with standard stroke(3.48)
Full floating pins
500$
NEW Eagle Forged 3.48" stroke crank. 1 pc rear main seal. New in box. 450$.
New OE style comp cams roller lifters. PN- CCA-850-16 160$
Comp cams Solid roller cam. Cam is "NEW" never used, never turned, never had a timing chain, or lifters or any pressure on lobes, but has been placed in a block, and has assembly lube on it. but it is still brand new.
570/576 lift 242/248 dur. @.050
110 LSA on 106 Centerline.
grind - CS XR280 R-10
220$ plus shipping.
Cam Style: Mechanical roller tappet
Basic Operating RPM Range: 2,500-6,500 RPM
Intake Duration at 050 inch Lift: 242
Exhaust Duration at 050 inch Lift: 248
Duration at 050 inch Lift: 242 int./248 exh.
Advertised Intake Duration: 280
Advertised Exhaust Duration: 286
Advertised Duration: 280 int./286 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.570 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.576 in.
Valve Lift with Factory Rocker Arm Ratio: 0.570 int./0.576 exh. lift
Lobe Separation (degrees): 110
Intake Valve Lash: 0.016 in.
Exhaust Valve Lash: 0.018 in.
Computer Controlled Compatible: No
Grind Number: CS XR280 R-10
Comp cams 305 hyd roller cam- for turbos/SC 08-305-8 -220$
Cam Style: Hydraulic roller tappet
Basic Operating RPM Range: 1,800-5,800 RPM
Intake Duration at 050 inch Lift: 220
Exhaust Duration at 050 inch Lift: 230
Duration at 050 inch Lift: 220 int./230 exh.
Advertised Intake Duration: 276
Advertised Exhaust Duration: 290
Advertised Duration: 276 int./290 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.510 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.510 in.
Valve Lift with Factory Rocker Arm Ratio: 0.510 int./0.510 exh. lift
Lobe Separation (degrees): 114
Intake Valve Lash: 0.000 in.
Exhaust Valve Lash: 0.000 in.
350 4 bolt block. 72 block year. .060 over. fully machined ready to go, line honed, bored and honed with torque plate. new brass freeze plugs. decked .010 550$ OBO. I paid 650$ for mchine work plus block.
Email for pics. everything is brand new , never used.
USED parts-
D36 Batwing 150 OBO.
A/c / Heater box cover with blower motor and evaporator - 75$ OBO
Hippiehead025@adelphia.net