FS: 4L60E Transmission rebuilt w/converter
10-30-2007, 01:29 PM
#1
Burning Brakes
Thread Starter
Member Since: Nov 2006
Location: Portsmouth Virginia 396LT4 435RWHP/400RWTQ Best so far 11.26 @ 123mph
Posts: 1,102
Likes: 0
Received 1 Like
on
1 Post
FS: 4L60E Transmission rebuilt w/converter
Trans. is sold!
Thanks CF.
RG
I have a good running rebuilt 4L60E tranny with 10,000 miles on it. I removed this original trans at 35,000 miles to have it rebuilt with better aftermarket parts to go behind my first 383 stroker engine in late 2003. I removed it last year when installing a new 396 stroker opting to go with a beefer PATC Raptor 4 transmission and 2800 stall and keep this tranny as a spare. The tranny was rebuilt/installed for $2400 including converter and trans. cooler by Curtis Price at Price's Transmission in Va. Beach in case you have any specific questions I can't answer. I did use the rear tail housing from it though for my Raptor 4 trans. And yes, in that 3 years of operation, the transmission probably saw about 2 dozen passes at the strip with no problems. I am asking $675.00 for the trans. and converter or $625.00 for just the trans. Local pick-up only.
Parts installed are:
Z-pack Clutches made by Transtar
Redline frictions by Alto
Kevlar bands by Borg Warner
Updated TCC valve by Sonnax
Beast sunshell
New 13 vane pump vice 10 (I think)
Transgo Stage 2 shift kit (4L60E-HD2-B)
Delmarva CSI 2000 stall converter
Steel deep trans pan
Thanks,
Rick Geer
Thanks CF.
RG
I have a good running rebuilt 4L60E tranny with 10,000 miles on it. I removed this original trans at 35,000 miles to have it rebuilt with better aftermarket parts to go behind my first 383 stroker engine in late 2003. I removed it last year when installing a new 396 stroker opting to go with a beefer PATC Raptor 4 transmission and 2800 stall and keep this tranny as a spare. The tranny was rebuilt/installed for $2400 including converter and trans. cooler by Curtis Price at Price's Transmission in Va. Beach in case you have any specific questions I can't answer. I did use the rear tail housing from it though for my Raptor 4 trans. And yes, in that 3 years of operation, the transmission probably saw about 2 dozen passes at the strip with no problems. I am asking $675.00 for the trans. and converter or $625.00 for just the trans. Local pick-up only.
Parts installed are:
Z-pack Clutches made by Transtar
Redline frictions by Alto
Kevlar bands by Borg Warner
Updated TCC valve by Sonnax
Beast sunshell
New 13 vane pump vice 10 (I think)
Transgo Stage 2 shift kit (4L60E-HD2-B)
Delmarva CSI 2000 stall converter
Steel deep trans pan
Thanks,
Rick Geer
Last edited by PDQUIK95; 11-05-2007 at 07:09 AM. Reason: Trans sold
