FS: SOCAL custom comp cam
#1
Burning Brakes
Thread Starter
FS: SOCAL custom comp cam
87-96 hyd roller cam 224/231 on a 112 lobe sep. Lift (1.6 ratio) is .622-intake and .607-exhaust. the profiles are a fast ramp design and have more area than some solid rollers.
This is for a stock hyd roller block.
The Cam is good for a max effort 383 ported TPI, single plane, or Miniram. I ran it with both TPI and Miniram with fastburn heads. The cam will flaten (sp?) a TPI but still have good 300+ Hp performance. The Miniram (single plane or HSR will respond similiarly) will do 350+ depending on tuning above 6K. Peak HP is about 6500 with a miniram. actual HP will depend on total engine airflow.
Cam has about 900 miles on it before I changed my mind for a different cam.
Price is $150 plus shipping from 93505
This is for a stock hyd roller block.
The Cam is good for a max effort 383 ported TPI, single plane, or Miniram. I ran it with both TPI and Miniram with fastburn heads. The cam will flaten (sp?) a TPI but still have good 300+ Hp performance. The Miniram (single plane or HSR will respond similiarly) will do 350+ depending on tuning above 6K. Peak HP is about 6500 with a miniram. actual HP will depend on total engine airflow.
Cam has about 900 miles on it before I changed my mind for a different cam.
Price is $150 plus shipping from 93505
Last edited by ZD1; 09-20-2012 at 02:51 AM. Reason: price